Search by vehicle
Search by KBA
Search by engine
Choose your car manufacturer, model and engine type. This will allow our system to find parts for your vehicle.
Choose a car by KBA.
Choose an engine.
View search
Hide search
Items for cross-reference number 79113
General information
Code: | FE18163 |
Brand: | FEBI BILSTEIN |
Title: | Sensor, crankshaft pulse |
Car: | OPEL |
Weight : | 0,07 kg |
Criteria
Length [mm]: | 870 mm |
Number of connectors: | 3 |
Weight [kg]: | 0,069 kg |
Supplementary Article/Info 2: | with seal ring |
General Information: | These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions. |
Show all
Show less
General information
Code: | V40-72-0305 |
Brand: | VEMO |
Title: | Sensor, crankshaft pulse |
Car: | OPEL |
Weight : | 0,00 kg |
Criteria
Diameter [mm]: | 35 mm |
Length [mm]: | 855 mm |
Weight [kg]: | 0,09 kg |
Cable Length [mm]: | 770 mm |
Number of pins: | 3 -pin connector |
Supplementary Article/Info 2: | for crankshaft |
Required quantity: | 1 |
Colour: | black |
Cable Length [mm]: | 820 mm |
Sensor Type: | Hall Sensor |
Sensor Type: | Active sensor |
Number of connectors: | 3 |
Rated Voltage [V]: | 12 V |
Fitting Depth [mm]: | 24 mm |
Supplementary Article/Info 2: | with cable |
Supplementary Article/Info 2: | with seal ring |
Connector Shape: | rectangular |
Number of mounting bores: | 1 |
Weight [kg]: | 0,12 kg |
General Information: | Products supplied by us are without exception intended for the designated use. Please note that our products are usually delivered without installation instructions. Installation may only be carried out by trained specialist personnel. There is no guarantee for inappropriate, improper or unintended use. |
General Information: | In the warranty, we always make a distinction between wear parts and vehicle parts. All wear parts are subject to a reduced warranty period and a maximum mileage. Brake components such as brake disks, brake pads, etc. maximum of 1000 km (break-in period). Therefore, warranty claims for brake parts are only reviewed with an installation invoice and a record of the wheel hub run-out measurement, including photos. For brake disks and brake pads, the break-in requirements specified by the vehicle manufacturer must be observed. When replacing brakes, the chassis components must always be checked with regard to clearance and the wheel hub with regard to wobble, and the appropriate documentation must be produced. If the vehicle is no longer in its original condition due to tuning work such as wheel accessories and tracking plates, the entitlement to make warranty claims is lost due to third-party work. The same warranty claims are lost if the vehicle is used for motor sports or similar events. |
Show all
Show less