|
Brand: VEMO |
Code: V40-72-0305 |
Title: Sensor, crankshaft pulse
Sensor, crankshaft pulse - V40-72-0305 VEMO - 1238228, 90506103, 090506103
Car: OPELWeight : | 0,00 kg |
Diameter [mm]: | 35 mm |
Length [mm]: | 855 mm |
Weight [kg]: | 0,09 kg |
Cable Length [mm]: | 770 mm |
Number of pins: | 3 -pin connector |
Supplementary Article/Info 2: | for crankshaft |
Required quantity: | 1 |
Colour: | black |
Cable Length [mm]: | 820 mm |
Sensor Type: | Hall Sensor |
Sensor Type: | Active sensor |
Number of connectors: | 3 |
Rated Voltage [V]: | 12 V |
Fitting Depth [mm]: | 24 mm |
Supplementary Article/Info 2: | with cable |
Supplementary Article/Info 2: | with seal ring |
Connector Shape: | rectangular |
Number of mounting bores: | 1 |
Weight [kg]: | 0,12 kg |
General Information: |
Products supplied by us are without exception intended for
the designated use.
Please note that our products are... [Show all] Products supplied by us are without exception intended for
the designated use.
Please note that our products are usually delivered without
installation instructions.
Installation may only be carried out by trained specialist
personnel.
There is no guarantee for inappropriate, improper or
unintended use.
[Show less] |
General Information: |
In the warranty, we always make a distinction between wear
parts and vehicle parts. All wear parts are subject to a... [Show all] In the warranty, we always make a distinction between wear
parts and vehicle parts. All wear parts are subject to a
reduced warranty period and a maximum mileage.
Brake components such as brake disks, brake pads, etc.
maximum of 1000 km (break-in period). Therefore, warranty
claims for brake parts are only reviewed with an
installation invoice and a record of the wheel hub run-out
measurement, including photos.
For brake disks and brake pads, the break-in requirements
specified by the vehicle manufacturer must be observed.
When replacing brakes, the chassis components must always be
checked with regard to clearance and the wheel hub with
regard to wobble, and the appropriate documentation must be
produced.
If the vehicle is no longer in its original condition due to
tuning work such as wheel accessories and tracking plates,
the entitlement to make warranty claims is lost due to
third-party work. The same warranty claims are lost if the
vehicle is used for motor sports or similar events. [Show less] |
Unfortunately, there is no additional description available for this product.
Documents
Used in
Reference Numbers
- OPEL # 12 38 228
- GENERAL MOTORS # 90506103
- OPEL # 090 506 103
- GENERAL MOTORS # 090506103
- GENERAL MOTORS # 009174621
- OPEL # 09 174 621
- OPEL # 62 38 677
- GENERAL MOTORS # 91746421
- OPEL # 06 238 377
- GENERAL MOTORS # 9174621
- OPEL # 90 506 103
- OPEL # 90506103
- OPEL # 90 50 610
- OPEL # 9174621
- OPEL # 01 238 228
- OPEL # 91 74 621
- OPEL # 62 38 377
- ST-TEMPLIN # 01.17.54.119799
- MAGNETI MARELLI # 064848107010
- OPTIMAL # 07-S058
- METZGER # 0902357
- JP GROUP # 1293701200
- FEBI BILSTEIN # 18163
- TOPRAN # 205 893
- MAXGEAR # 24-0010
- VALEO # 254088
- AUTOMEGA # 3012380228
- EFI AUTOMOTIVE # 303103
- IPD # 40-2109
- SWAG # 40 91 8163
- AIC # 51702
- ERA # 550073
- BREMI # 60176
- MEYLE # 614 899 0021
- BEHR HELLA SERVICE # 6PU 009 110-271
- HELLA # 6PU 009 163-831
- HERTH+BUSS ELPARTS # 70610004
- HOFFER # 7517047
- FAE # 79113
- NGK # 81420
- SIDAT # 83.112
- MEAT & DORIA # 87047
- TRISCAN # 8855 24104
- AUTEX # 903114
- FACET # 9.0314
- CALORSTAT by Vernet # CS0341
- BBT # CSS702
- INTERMOTOR # EPS012
- FLENNOR # FSE51702
- CONTINENTAL/VDO # S103857002Z
- LUCAS # SEB490
- DELPHI # SS10799
- METZGER # 0902012
- INTERMOTOR # 18961
- ERA # 550073A
- BEHR HELLA SERVICE # 6PU 009 110-277
- JP GROUP # 881238228
- BEHR HELLA SERVICE # 6PU 009 163-831
- METZGER # NO-OPEL021
- 1238228
- 6238377
- 90506103
- 9174621
- VEMO # V40-72-0305