We have added three electric pumps from PIERBURG for TESLA / models 3, S, X and Y. These pumps, namely 7.07223.08.0, 7.07223.09.0 and 7.07224.01.0, replace up to 14 different coolant pumps, including those that cool electric motors and other components in separate cooling circuits. On newer Tesla vehicles, even the pumps in the distribution tank and the coolant control valve can be replaced.
The universal mounting brackets supplied with the pumps and the marked mounting direction make the new pumps easy to install in a variety of situations. In total, they enable the replacement of approximately 11.5 million pumps in more than 4.5 million Tesla vehicles.
Installation instructions for all three pumps are available here.
Don't forget to sign in to view your prices.
General information
| Code: | 7.07223.08.0 |
| Brand: | PIERBURG |
| Title: | Water Pump, engine cooling |
Criteria
| Operating Mode: | Electric |
| Voltage [V]: | 12,5 V |
| Diameter 1 [mm]: | 21 mm |
| Diameter 2 [mm]: | 21 mm |
| Water pump impeller material: | Plastic |
| Signal type: | PWM |
| Total Width [mm]: | 65 mm |
| Supplementary Article/Supplementary Info: | with holder |
General information
| Code: | 7.07224.01.0 |
| Brand: | PIERBURG |
| Title: | Auxiliary Water Pump (cooling water circuit) |
Criteria
| Operating Mode: | Electric |
| Voltage [V]: | 12,5 V |
| Diameter 1 [mm]: | 21 mm |
| Supplementary Article/Supplementary Info 2: | with bolts/screws |
| Supplementary Article/Supplementary Info 2: | with seal ring |
| Water pump impeller material: | Plastic |
| Total Width [mm]: | 68 mm |
| Signal type: | PWM |
General information
| Code: | 7.07223.09.0 |
| Brand: | PIERBURG |
| Title: | Water Pump, engine cooling |
Criteria
| Operating Mode: | Electric |
| Voltage [V]: | 12,5 V |
| Diameter 1 [mm]: | 21 mm |
| Diameter 2 [mm]: | 21 mm |
| Water pump impeller material: | Plastic |
| Signal type: | PWM |
| Total Width [mm]: | 65 mm |
| Supplementary Article/Supplementary Info: | with holder |
| Supplementary Article/Supplementary Info: | Housing with cooling fins |