Search by vehicle
Search by KBA
Search by engine
Choose your car manufacturer, model and engine type. This will allow our system to find parts for your vehicle.
Choose a car by KBA.
Choose an engine.
View search
Hide search
Items for cross-reference number V10-50041
General information
| Code: | 7.07152.44.0 |
| Brand: | PIERBURG |
| Title: | Water Pump, engine cooling |
| Car: | VW |
| Weight : | 1,05 kg |
Criteria
| Operating Mode: | Mechanical |
| Water pump impeller material: | Metal |
| Impeller Diameter [mm]: | 73 mm |
| Supplementary Article/Info 2: | with seal ring |
| Number of blades/vanes: | 20 |
Show all
Show less
General information
| Code: | CPW-AU-027 |
| Brand: | NTY |
| Title: | Water Pump, engine cooling |
| Car: | AUDI A6 2.5 TDI 94-97, 100 2.4 D 90-94, VW T4 2.4 D, 2.5 TDI -98 |
| Weight : | 1,17 kg |
Criteria
| Number of Teeth: | 20 |
| Supplementary Article/Info 2: | with seal ring |
| Number of blades/vanes: | 7 |
| Observe service information: | yes |
| Water pump impeller material: | Metal |
| Seal Material: | Rubber |
| Fabrication Number: | CPW-AU-027 |
Show all
Show less
General information
| Code: | FE09518 |
| Brand: | FEBI BILSTEIN |
| Title: | Water Pump, engine cooling |
| Car: | ŠKODA-VW |
| Weight : | 0,85 kg |
Criteria
| Water pump impeller material: | Plastic |
| Seal Material: | Rubber |
| Material: | Cast Aluminium |
| Number of Teeth: | 20 |
| Number of blades/vanes: | 5 |
| Weight [kg]: | 0,85 kg |
| Supplementary Article/Info 2: | with seal ring |
| Observe service information: | yes |
| General Information: | These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions. |
Show all
Show less
General information
| Code: | FE22206 |
| Brand: | FEBI BILSTEIN |
| Title: | Water Pump, engine cooling |
| Car: | ŠKODA-VW |
| Weight : | 0,91 kg |
Criteria
| Water pump impeller material: | Metal |
| Seal Material: | Rubber |
| Material: | Cast Aluminium |
| Number of Teeth: | 20 |
| Number of blades/vanes: | 7 |
| Weight [kg]: | 0,914 kg |
| Supplementary Article/Info 2: | with seal ring |
| Observe service information: | yes |
| General Information: | These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions. |
Show all
Show less
General information
| Code: | 1130120042/HD |
| Brand: | MEYLE |
| Title: | Water Pump, engine cooling |
| Car: | VW |
| Weight : | 1,00 kg |
Criteria
| Supplementary Article/Supplementary Info: | with seal |
| Water Pump Type: | for toothed belt drive |
| Number of Teeth: | 20 |
| Reinforced version: | yes |
| Number of blades/vanes: | 7 |
| Observe service information: | yes |
| Quality: | Sealed with SiC/SiC |
| Water pump impeller material: | Metal |
| New part without deposit: | yes |
| Article number of the recommended special tool: | 999 990 0002 |
| Housing material: | Stainless Steel |
| Chemical Properties: | Heat-resistant |
| General Information: | 4-year warranty on all MEYLE-HD parts. Engineered and quality approved in Germany. |
| General Information: | Improved design for longer service life: MEYLE-HD parts deliver enhanced durability. Compared to OE, MEYLE-HD is technically improved with reinforced inner parts, using higher quality materials or optimized design solution. |
| General Information: | MEYLE provides a 100,000-mile guarantee for all MEYLE water pumps and a 4-year warranty for MEYLE-HD water pumps. The 100,00 mile warranty requires the cooling system to be flushed before installation. |
| General Information: | Water pump bearing in OE quality, according to application: 4-point roller/ball: Best distribution of high radial forces as well as increased axial support or Angular contact: Absorption of axial and medium radial forces as well as increased axial support. |
| General Information: | Simply lasts longer: MEYLE-HD water pump with extreme hard wearing SiC/SiC mechanical seal. Resistant against abrasive contamination. Housing made of stainless steel, resistant to high temperature. |
Show all
Show less
General information
| Code: | 538004510 |
| Brand: | Schaeffler INA |
| Title: | Water Pump, engine cooling |
| Car: | VW |
| Weight : | 1,20 kg |
Criteria
| Water Pump Type: | for toothed belt drive |
| Number of Teeth: | 20 |
| Pulleys: | with belt pulley |
Show all
Show less