Search by vehicle
Search by KBA
Search by engine
Choose your car manufacturer, model and engine type. This will allow our system to find parts for your vehicle.
Choose a car by KBA.
Choose an engine.
View search
Hide search
Items for cross-reference number T0286
General information
Code: | FE103347 |
Brand: | FEBI BILSTEIN |
Title: | Water Pump, engine cooling |
Car: | ŠKODA-VW |
Weight : | 1,53 kg |
Criteria
Water pump impeller material: | Plastic |
Seal Material: | Rubber |
Material: | Cast Aluminium |
Number of Teeth: | 28 |
Supplementary Article/Info 2: | with thermostat |
Number of blades/vanes: | 6 |
Weight [kg]: | 1,53 kg |
Housing Type: | with housing |
For OE number: | 04E 121 600 CR |
Observe service information: | yes |
General Information: | These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions. |
Show all
Show less
General information
Code: | FE106497 |
Brand: | FEBI BILSTEIN |
Title: | Water Pump, engine cooling |
Car: | ŠKODA-VW |
Weight : | 1,53 kg |
Criteria
Water pump impeller material: | Plastic |
Seal Material: | Rubber |
Material: | Aluminium |
Number of Teeth: | 28 |
Supplementary Article/Info 2: | with thermostat |
Number of blades/vanes: | 6 |
Weight [kg]: | 1,53 kg |
Housing Type: | with housing |
For OE number: | 04E 121 600 CS |
Observe service information: | yes |
General Information: | These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions. |
Show all
Show less
General information
Code: | FE171580 |
Brand: | FEBI BILSTEIN |
Title: | Water Pump, engine cooling |
Car: | ŠKODA-VW |
Weight : | 0,92 kg |
Criteria
Water pump impeller material: | Plastic |
Seal Material: | Rubber |
Material: | Cast Aluminium |
Number of blades/vanes: | 6 |
Weight [kg]: | 0,924 kg |
Supplementary Article/Supplementary Info: | with gaskets/seals |
General Information: | These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions. |
Show all
Show less
General information
Code: | RNK-AR-011 |
Brand: | NTY |
Title: | Tensioner Pulley, V-belt |
Car: | ALFA ROMEO 147, 156, 166, GT, GTV, SPIDER; LANCIA KAPPA, THESIS 2.0-3.2 10.94-09.10 |
Weight : | 0,16 kg |
Criteria
Width [mm]: | 26 mm |
Outer Diameter [mm]: | 80 mm |
Inner Diameter [mm]: | 17 mm |
Fabrication Number: | RNK-AR-011 |
Show all
Show less