Search by vehicle
Search by KBA
Search by engine
Choose your car manufacturer, model and engine type. This will allow our system to find parts for your vehicle.
Choose a car by KBA.
Choose an engine.
View search
Hide search
Items for cross-reference number CS 1493
General information
| Code: | FE193416 |
| Brand: | FEBI BILSTEIN |
| Title: | Starter |
| Car: | MAZDA |
| Weight : | 3,10 kg |
Criteria
| Voltage [V]: | 12 V |
| Number of Teeth: | 11 |
| Rated Power [kW]: | 1,4 kW |
| Weight [kg]: | 3,102 kg |
| General Information: | These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions. |
Show all
Show less
General information
| Code: | FE27799 |
| Brand: | FEBI BILSTEIN |
| Title: | Oil Filter |
| Car: | RENAULT |
| Weight : | 1,24 kg |
Criteria
| Filter type: | Spin-on Filter |
| Filter type: | Side Stream Filtration |
| Height [mm]: | 264 mm |
| Inner Diameter [mm]: | 93 mm |
| Outer Diameter [mm]: | 107 mm |
| Internal Thread Size: | 1 3/8" - 16 |
| Weight [kg]: | 1,239 kg |
| Observe service information: | yes |
| General Information: | These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions. |
Show all
Show less
General information
| Code: | 0986024760 |
| Brand: | BOSCH |
| Title: | Starter |
| Car: | MAZDA |
| Weight : | 3,20 kg |
Criteria
| Service exchange part: | yes |
| Voltage [V]: | 12 V |
| Rated Power [kW]: | 1,4 kW |
| Number of mounting bores: | 2 |
| Number of threaded holes: | |
| Clamp: | 30,50 |
| Rotation Direction: | Clockwise rotation |
| Pinion Rest Position [mm]: | 22 mm |
| Starter Type: | Self-supporting |
| Bore Ø [mm]: | 10,5 mm |
| Bore Ø 2 [mm]: | 10,5 mm |
| Length [mm]: | 210 mm |
| Position/Degree: | rechts ° |
| Mounting Angle [degrees]: | 100 ° |
| Jaw opening angle measurement [Degree]: | 100 ° |
| Fastening hole angle measurement [Degree]: | 100 ° |
Show all
Show less