Search by vehicle
Search by KBA
Search by engine
Choose your car manufacturer, model and engine type. This will allow our system to find parts for your vehicle.
Choose a car by KBA.
Choose an engine.
View search
Hide search
Items for cross-reference number 9719
General information
| Code: | FE102791 |
| Brand: | FEBI BILSTEIN |
| Title: | Seal, injector holder |
| Car: | PEUGEOT |
| Weight : | 0,00 kg |
Criteria
| Thickness [mm]: | 1,5 mm |
| Inner Diameter [mm]: | 7,3 mm |
| Outer Diameter [mm]: | 16 mm |
| Material: | Copper |
| Weight [kg]: | 0,001 kg |
| General Information: | These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions. |
Show all
Show less
General information
| Code: | FE102801 |
| Brand: | FEBI BILSTEIN |
| Title: | Seal, injector holder |
| Car: | PEUGEOT |
| Weight : | 0,00 kg |
Criteria
| Thickness [mm]: | 1,5 mm |
| Inner Diameter [mm]: | 7,3 mm |
| Outer Diameter [mm]: | 16 mm |
| Material: | Copper |
| Weight [kg]: | 0,001 kg |
| General Information: | These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions. |
Show all
Show less
General information
| Code: | FE174365 |
| Brand: | FEBI BILSTEIN |
| Title: | Seal, injector holder |
| Car: | PEUGEOT |
| Weight : | 0,00 kg |
Criteria
| Thickness [mm]: | 1,5 mm |
| Inner Diameter [mm]: | 7,3 mm |
| Outer Diameter [mm]: | 16 mm |
| Material: | Copper |
| Weight [kg]: | 0,001 kg |
| General Information: | These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions. |
Show all
Show less
General information
| Code: | FE178618 |
| Brand: | FEBI BILSTEIN |
| Title: | Seal Ring, injector |
| Car: | BMW |
| Weight : | 0,00 kg |
Criteria
| Thickness [mm]: | 1,5 mm |
| Inner Diameter [mm]: | 7 mm |
| Outer Diameter [mm]: | 15 mm |
| Inner Diameter 1 [mm]: | 7,5 mm |
| Weight [kg]: | 0,002 kg |
| General Information: | These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions. |
Show all
Show less
General information
| Code: | GPP-AU-031 |
| Brand: | NTY |
| Title: | Charge Air Hose |
| Car: | VW ENG 1.9/2.0TDI GOLF 03-, PASSAT 05-, TOURAN 03-, CADDY 04-, EOS 06-, AUDI A3 08-, SKODA OCTAVIA II 04-, SEAT IBIZA 08-, TOLEDO 04-, LEON 05-, ALTEA 04-, ALTEA XL 06- |
| Weight : | 0,46 kg |
Criteria
| Material: | Rubber with fabric lining |
| Fitting Position: | Right |
| Fitting Position: | Lower |
| Fitting Position: | Front |
| Fitting Position: | Charge Air Cooler |
| Fabrication Number: | GPP-AU-031 |
Show all
Show less
General information
| Code: | HOF7500125 |
| Brand: | HOFFER |
| Title: | Washer Fluid Pump, window cleaning |
| Car: | ŠKODA-VW |
| Weight : | 0,12 kg |
Criteria
| Pump Type: | Dual Pump |
| Number of connectors: | 2 |
| For OE number: | 1K6955651 |
Show all
Show less
General information
| Code: | HOF7517026 |
| Brand: | HOFFER |
| Title: | Sensor, crankshaft pulse |
| Car: | RENAULT |
| Weight : | 0,14 kg |
Criteria
| Number of pins: | 2 -pin connector |
| Cable Length [mm]: | 1390 mm |
| Number of mounting bores: | 2 |
| Sensor Type: | Inductive Sensor |
| Resistor [Ohm]: | 240 Ohm |
| Fitting Depth [mm]: | 24 mm |
Show all
Show less
General information
| Code: | HOF9719 |
| Brand: | HOFFER |
| Title: | Repair Kit, injection nozzle |
| Car: | KHD |
| Weight : | 0,02 kg |
Criteria
| Fuel Mixture Formation: | Common Rail (CR) |
General information
| Code: | HOFH5010373 |
| Brand: | HOFFER |
| Title: | Starter |
| Car: | TOYOTA |
| Weight : | 3,23 kg |
Criteria
| Voltage [V]: | 12 V |
| Rated Power [kW]: | 1,7 kW |
| Flange Ø [mm]: | 60 mm |
| Plug Type ID: | 30-50 |
| Number of Teeth: | 10 |
| Number of mounting bores: | 2 |
| Pinion Rest Position [mm]: | 26 mm |
| Rotation Direction: | Clockwise rotation |
Show all
Show less
General information
| Code: | MEC130016 |
| Brand: | MEC-DIESEL |
| Title: | Seal Ring, injector |
| Car: | IVECO |
| Weight : | 0,03 kg |
Criteria
| Thickness [mm]: | 1,5 mm |