Search by vehicle
Search by KBA
Search by engine
Choose your car manufacturer, model and engine type. This will allow our system to find parts for your vehicle.
Choose a car by KBA.
Choose an engine.
View search
Hide search
Items for cross-reference number 90066
General information
| Code: | 90066 |
| Brand: | MEC-DIESEL |
| Title: | Engine block |
| Car: | PEUGEOT |
General information
| Code: | 062900142304 |
| Brand: | MAGNETI MARELLI |
| Title: | Glow Plug |
| Car: | NISSAN |
Criteria
| Tightening torque from [Nm]: | 12 Nm |
| Connector type: | M4 |
| Tightening Torque [Nm]: | 2,5 Nm |
| Tightening torque to [Nm]: | 15 Nm |
| Glow Plug Design: | Metal glow plug |
| Mounting Inclination: | 120 ° |
| Voltage [V]: | 11 V |
| Length 1 [mm]: | 50 mm |
| Length 2 [mm]: | 21,5 mm |
| Overall Length [mm]: | 86,9 mm |
| Thread Size: | M10X1.25 |
| Spanner Size: | 12 |
| Heat-up Time [min]: | 8 min |
Show all
Show less
General information
| Code: | 172100030010 |
| Brand: | MAGNETI MARELLI |
| Title: | Sensor, wheel speed |
| Car: | ŠKODA-VW |
Criteria
| Fitting Position: | Rear Axle |
| Resistor [Ohm]: | 1650 Ohm |
| Cable Length [mm]: | 1090 mm |
| For OE number: | 3B0927807B |
| Number of pins: | 2 -pin connector |
Show all
Show less
General information
| Code: | ESL-DA-000 |
| Brand: | NTY |
| Title: | Oxygen Sensor |
| Car: | DAIHATSU SIRION 1.0,1.3,1.5 2005-,SUBARU JUSTY 1.0 2007-/DIAGNOSTIC/ |
Criteria
| Oxygen Sensor: | Heated |
| Oxygen Sensor: | Thread pre-greased |
| Cable Length [mm]: | 250 mm |
| Number of circuits: | 4 |
| For OE number: | 89465-B1020 |
Show all
Show less
General information
| Code: | ESL-TY-002 |
| Brand: | NTY |
| Title: | Oxygen Sensor |
| Car: | LEXUS IS200 2.0 1999-/REGULATORY/ |
Criteria
| Oxygen Sensor: | Regulating Sensor |
| Oxygen Sensor: | Thread pre-greased |
| Fitting Position: | Front |
| Fitting Position: | before catalytic converter |
Show all
Show less
General information
| Code: | ESL-TY-008 |
| Brand: | NTY |
| Title: | Oxygen Sensor |
| Car: | TOYOTA YARIS SCP10 1.0I 16V 1999-/DIAGNOSTIC/ |
Criteria
| Oxygen Sensor: | Regulating Sensor |
| Oxygen Sensor: | Diagnostic Probe |
| Oxygen Sensor: | Thread pre-greased |
| Fitting Position: | Front |
| Fitting Position: | Left Front |
| Fitting Position: | before catalytic converter |
| Fitting Position: | after catalytic converter |
| Length [mm]: | 275 mm |
Show all
Show less
General information
| Code: | ESL-TY-016 |
| Brand: | NTY |
| Title: | Oxygen Sensor |
| Car: | TOYOTA AVENSIS 1.8 2000-/REGULATORY,LEFT STRONY/ |
Criteria
| Oxygen Sensor: | Thread pre-greased |
| Length [mm]: | 470 mm |
| Number of circuits: | 4 |
Show all
Show less
General information
| Code: | FE107589 |
| Brand: | FEBI BILSTEIN |
| Title: | Oxygen Sensor |
| Car: | DAIHATSU |
Criteria
| Oxygen Sensor: | Heated |
| External Thread Size: | M18 x 1,5 |
| Spanner Size: | 22 |
| Number of connectors: | 4 |
| Cable Length [mm]: | 165 mm |
| General Information: | These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions. |
Show all
Show less
General information
| Code: | FE175310 |
| Brand: | FEBI BILSTEIN |
| Title: | Belt Pulley, crankshaft |
| Tag: | ProKit |
| Car: | RENAULT |
Criteria
| Width [mm]: | 40 mm |
| Inner Diameter [mm]: | 38 mm |
| Outer Diameter [mm]: | 158 mm |
| Parameter: | 7PK |
| Supplementary Article/Supplementary Info 2: | with spacer |
| Supplementary Article/Supplementary Info 2: | with screw |
| General Information: | These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions. |
Show all
Show less
General information
| Code: | FE175966 |
| Brand: | FEBI BILSTEIN |
| Title: | Oxygen Sensor |
| Car: | TOYOTA |
Criteria
| Oxygen Sensor: | Heated |
| External Thread Size: | M18 x 1,5 |
| Spanner Size: | 22 |
| Number of connectors: | 4 |
| Cable Length [mm]: | 410 mm |
| General Information: | These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions. |
Show all
Show less