Search by vehicle
Search by KBA
Search by engine
Choose your car manufacturer, model and engine type. This will allow our system to find parts for your vehicle.
Choose a car by KBA.
Choose an engine.
View search
Hide search
Items for cross-reference number 550 968
General information
| Code: | FE44845 |
| Brand: | FEBI BILSTEIN |
| Title: | Sensor, camshaft position |
| Car: | FIAT |
| Weight : | 0,03 kg |
Criteria
| Number of connectors: | 3 |
| Fitting Position: | Upper |
| Weight [kg]: | 0,026 kg |
| Supplementary Article/Info 2: | with seal ring |
| General Information: | These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions. |
Show all
Show less
General information
| Code: | FE47586 |
| Brand: | FEBI BILSTEIN |
| Title: | Sensor, eccentric shaft (variable valve lift) |
| Car: | MINI |
| Weight : | 0,05 kg |
Criteria
| External Thread Size: | M6 x 1 |
| Spanner Size: | 10 |
| Bolt Head-/Nut Design: | Male Hex |
| Number of connectors: | 9 |
| Weight [kg]: | 0,054 kg |
| General Information: | These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions. |
Show all
Show less
General information
| Code: | HOF7517804 |
| Brand: | HOFFER |
| Title: | Sensor, eccentric shaft (variable valve lift) |
| Car: | BMW |
| Weight : | 0,06 kg |
Criteria
| Number of pins: | 9 -pin connector |
| Supplementary Article/Info 2: | without cable |
General information
| Code: | JPR772 |
| Brand: | TRW |
| Title: | Hydraulic Pump, steering |
| Car: | ŠKODA-VW |
| Weight : | 1,80 kg |
Criteria
| Operating Mode: | Hydraulic |
| Manufacturer Restriction: | KAYABA |
| Number of inlets/outlets: | 2 |
| Suction pipe connector diameter [mm]: | 16 mm |
| Backflow Connector Thread Size: | M16x1,5 |
| Distance from adapter to pump [mm]: | 32 mm |
| Mounting bores distance [mm]: | 80 mm |
| Mounting points diameter [mm]: | 8 mm |
| Number of mounting bores: | 2 |
| Pressure [bar]: | 120 bar |
| Observe technical data: | yes |
| Service exchange part: | yes |
Show all
Show less