Search by vehicle
Search by KBA
Search by engine
Choose your car manufacturer, model and engine type. This will allow our system to find parts for your vehicle.
Choose a car by KBA.
Choose an engine.
View search
Hide search
Items for cross-reference number 46-0009
7.14309.09.0 - PIERBURG Control Flap, air supply
We recommend!General information
Code: | 7.14309.09.0 |
Brand: | PIERBURG |
Title: | Control Flap, air supply |
Car: | ŠKODA-VW |
Weight : | 0,83 kg |
Criteria
Operating Mode: | Electronic |
Diameter [mm]: | 56 mm |
Supplementary Article/Info 2: | Control Unit/Software must be trained/updated |
Observe the vehicle manufacturer specifications: | yes |
Show all
Show less
Netto price:
$406.29
($406.29 without VAT 0%)
Your price:
-40%
$243.77
($243.77 without VAT 0%)
Warehouse: | 1 pcs | |
Supplier: | > 25 pcs |
General information
Code: | FE03223 |
Brand: | FEBI BILSTEIN |
Title: | Water Pump, engine cooling |
Car: | MERCEDES |
Weight : | 7,92 kg |
Criteria
Water pump impeller material: | Grey Cast Iron |
Material: | Grey Cast Iron |
Number of blades/vanes: | 8 |
Weight [kg]: | 7,919 kg |
Supplementary Article/Supplementary Info: | with gaskets/seals |
Observe service information: | yes |
General Information: | These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions. |
Show all
Show less
General information
Code: | FE03674 |
Brand: | FEBI BILSTEIN |
Title: | Wheel Bearing Kit |
Car: | SEAT |
Weight : | 0,25 kg |
Criteria
Bearing Type: | Tapered Roller Bearing |
Fitting Position: | Rear Axle Left |
Fitting Position: | Rear Axle Right |
Outer Diameter 1 [mm]: | 40 mm |
Outer Diameter 2 [mm]: | 50 mm |
Width 1 [mm]: | 14 mm |
Width 2 [mm]: | 14 mm |
Inner Diameter 1 [mm]: | 17,5 mm |
Weight [kg]: | 0,254 kg |
Inner Diameter 2 [mm]: | 29 mm |
Supplementary Article/Supplementary Info: | with attachment material |
General Information: | These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions. |
Show all
Show less
General information
Code: | FE102791 |
Brand: | FEBI BILSTEIN |
Title: | Seal, injector holder |
Car: | PEUGEOT |
Weight : | 0,00 kg |
Criteria
Thickness [mm]: | 1,5 mm |
Inner Diameter [mm]: | 7,3 mm |
Outer Diameter [mm]: | 16 mm |
Material: | Copper |
Weight [kg]: | 0,001 kg |
General Information: | These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions. |
Show all
Show less
General information
Code: | FE102801 |
Brand: | FEBI BILSTEIN |
Title: | Seal, injector holder |
Car: | PEUGEOT |
Weight : | 0,00 kg |
Criteria
Thickness [mm]: | 1,5 mm |
Inner Diameter [mm]: | 7,3 mm |
Outer Diameter [mm]: | 16 mm |
Material: | Copper |
Weight [kg]: | 0,001 kg |
General Information: | These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions. |
Show all
Show less
General information
Code: | FE107023 |
Brand: | FEBI BILSTEIN |
Title: | Throttle Body |
Car: | ŠKODA-VW |
Weight : | 0,78 kg |
Criteria
Voltage [V]: | 12 V |
Number of connectors: | 4 |
Weight [kg]: | 0,783 kg |
General Information: | These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions. |
Show all
Show less
General information
Code: | FE172970 |
Brand: | FEBI BILSTEIN |
Title: | Thermostat, coolant |
Car: | FORD |
Weight : | 0,19 kg |
Criteria
Opening Temperature [°C]: | 98 °C |
Weight [kg]: | 0,193 kg |
Housing Type: | with housing |
General Information: | These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions. |
Show all
Show less
General information
Code: | FE174365 |
Brand: | FEBI BILSTEIN |
Title: | Seal, injector holder |
Car: | PEUGEOT |
Weight : | 0,00 kg |
Criteria
Thickness [mm]: | 1,5 mm |
Inner Diameter [mm]: | 7,3 mm |
Outer Diameter [mm]: | 16 mm |
Material: | Copper |
Weight [kg]: | 0,001 kg |
General Information: | These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions. |
Show all
Show less