Search by vehicle
Search by KBA
Search by engine
Choose your car manufacturer, model and engine type. This will allow our system to find parts for your vehicle.
Choose a car by KBA.
Choose an engine.
View search
Hide search
Items for cross-reference number 400008
General information
Code: | 357285070000 |
Brand: | MAGNETI MARELLI |
Title: | Shock Absorber |
Car: | MINI |
Weight : | 2,43 kg |
Criteria
Fitting Position: | Rear Axle |
Length [mm]: | 417 mm |
Length 2 [mm]: | 294 mm |
Shock Absorber Design: | Suspension Strut |
Shock Absorber Mounting Type: | Top pin |
Shock Absorber Mounting Type: | Bottom eye |
Shock Absorber Type: | Gas Pressure |
Shock Absorber System: | Twin-Tube |
Diameter 1 [mm]: | 45 mm |
Diameter 2 [mm]: | 30 mm |
Spring Type: | for vehicles with coil spring suspension |
Show all
Show less
General information
Code: | CVJ13-1041 |
Brand: | FRECCIA |
Title: | Joint Kit, drive shaft |
Car: | ALFA ROMEO |
Weight : | 2,25 kg |
Criteria
Fitting Position: | Wheel Side |
Thread Size: | M24x1,5 |
External Toothing wheel side: | 25 |
Internal Toothing wheel side: | 26 |
Seal Diameter [mm]: | 51 mm |
Machined: | with groove in inner part (middle) |
Fitting Position: | Front Axle |
Show all
Show less
General information
Code: | FE02249 |
Brand: | FEBI BILSTEIN |
Title: | Deflection/Guide Pulley, V-ribbed belt |
Car: | MERCEDES |
Weight : | 0,23 kg |
Criteria
Width of castor bearing surface [mm]: | 25 mm |
Width [mm]: | 31 mm |
Outer Diameter [mm]: | 80 mm |
Material: | Plastic |
Supplementary Article/Info 2: | with cap |
Weight [kg]: | 0,226 kg |
General Information: | These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions. |
Show all
Show less
General information
Code: | FE31959 |
Brand: | FEBI BILSTEIN |
Title: | Mounting, engine |
Car: | ŠKODA-VW |
Weight : | 0,58 kg |
Criteria
Material: | Rubber/Metal |
Fitting Position: | Rear |
Mounting Type: | Rubber-Metal Mount |
Weight [kg]: | 0,581 kg |
For OE number: | 1K0 199 855 BA |
General Information: | These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions. |
Show all
Show less
General information
Code: | RNK-ME-003 |
Brand: | NTY |
Title: | Deflection/Guide Pulley, V-ribbed belt |
Car: | DAEWOO KORANDO, MUSSO; MERCEDES 190 (W201), C T-MODEL (S202), C (W202), COUPE (C124), E T-MODEL (S124), E T-MODEL (S210), E (W124), E (W210) 2.0-5.0 10.82- |
Weight : | 0,24 kg |
Criteria
Width [mm]: | 25,5 mm |
Material: | Plastic |
Inner Diameter [mm]: | 8 mm |
Outer Diameter [mm]: | 80 mm |
Fabrication Number: | RNK-ME-003 |
Show all
Show less