Search by vehicle
Search by KBA
Search by engine
Choose your car manufacturer, model and engine type. This will allow our system to find parts for your vehicle.
Choose a car by KBA.
Choose an engine.
View search
Hide search
Items for cross-reference number 37580
General information
Code: | 363916060629 |
Brand: | MAGNETI MARELLI |
Title: | Brake Pad Set, disc brake |
Car: | SUBARU |
Weight : | 0,74 kg |
Criteria
Brake System: | AKEBONO |
WVA Number: | 24610 |
Length 1 [mm]: | 98,6 mm |
Height 1 [mm]: | 42,5 mm |
Thickness 1 [mm]: | 14,8 mm |
Wear Warning Contact: | with acoustic wear warning |
Number of wear indicators [per axle]: | 2 Per Axle |
Show all
Show less
General information
Code: | BMO-FT-004 |
Brand: | NTY |
Title: | Oil Sump |
Car: | FIAT PUNTO/GRANDE PUNTO 1.2 16V, 1.4 16V 97-, PANDA 1.2 16V 03-, BRAVO/BRAVA 1.2 16V 98-, 500 1.2 16V 07- /BOLTS 8MM/ |
Weight : | 2,18 kg |
Criteria
Supplementary Article/Info 2: | without bore for oil level sensor |
Material: | Steel |
Fabrication Number: | BMO-FT-004 |
Show all
Show less
General information
Code: | FE18807 |
Brand: | FEBI BILSTEIN |
Title: | Temperature Switch, radiator fan |
Car: | PEUGEOT |
Weight : | 0,04 kg |
Criteria
External Thread Size: | M22 x 1,5 |
Number of connectors: | 2 |
Switch Point [°C]: | 92 °C |
Switch Point [°C]: | 97 °C |
Weight [kg]: | 0,04 kg |
Supplementary Article/Info 2: | with seal ring |
General Information: | These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions. |
Show all
Show less
General information
Code: | FE37580 |
Brand: | FEBI BILSTEIN |
Title: | Oil Sump |
Car: | FIAT |
Weight : | 2,35 kg |
Criteria
Weight [kg]: | 2,35 kg |
Oil Sump Material: | Sheet Steel |
For OE number: | 55200418 |
Supplementary Article/Supplementary Info: | with oil drain plug |
Supplementary Article/Info 2: | with seal ring |
General Information: | These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions. |
Show all
Show less
General information
Code: | HOF7472646 |
Brand: | HOFFER |
Title: | Temperature Switch, radiator fan |
Car: | FIAT |
Weight : | 0,06 kg |
Criteria
Number of pins: | 2 -pin connector |
Socket colour: | blue |
Connector Shape: | rectangular |
Closing temperature [°C]: | 97 °C |
Opening Temperature [°C]: | 92 °C |
Thread Size: | M22x1,5 mm |
Spanner Size: | 29 mm |
For OE number: | 1264 40 |
For OE number: | 9629968880 |
Show all
Show less
General information
Code: | V24-0316 |
Brand: | VAICO |
Title: | Oil Sump |
Car: | FIAT |
Weight : | 0,00 kg |
Criteria
Number of bores: | 14 |
Supplementary Article/Info 2: | without seal ring |
Length [mm]: | 390 mm |
Section: | Lower Section |
Fitting Position: | Oil Sump |
Supplementary Article/Supplementary Info: | with oil drain plug |
See accessories list for additionally required parts: | yes |
Height [mm]: | 200 mm |
Oil Sump Material: | Sheet Steel |
Width [mm]: | 222,0 mm |
Surface: | Powder coated |
Bolt Ø [mm]: | 8 mm |
Supplementary Article/Info 2: | without oil sump gasket |
Observe the vehicle manufacturer specifications: | yes |
Observe system fill quantity: | yes |
Weight [kg]: | 2,3602 kg |
General Information: | Products supplied by us are without exception intended for the designated use. Please note that our products are usually delivered without installation instructions. Installation may only be carried out by trained specialist personnel. There is no guarantee for inappropriate, improper or unintended use. |
General Information: | In the warranty, we always make a distinction between wear parts and vehicle parts. All wear parts are subject to a reduced warranty period and a maximum mileage. Brake components such as brake disks, brake pads, etc. maximum of 1000 km (break-in period). Therefore, warranty claims for brake parts are only reviewed with an installation invoice and a record of the wheel hub run-out measurement, including photos. For brake disks and brake pads, the break-in requirements specified by the vehicle manufacturer must be observed. When replacing brakes, the chassis components must always be checked with regard to clearance and the wheel hub with regard to wobble, and the appropriate documentation must be produced. If the vehicle is no longer in its original condition due to tuning work such as wheel accessories and tracking plates, the entitlement to make warranty claims is lost due to third-party work. The same warranty claims are lost if the vehicle is used for motor sports or similar events. |
Show all
Show less