Search by vehicle
Search by KBA
Search by engine
Choose your car manufacturer, model and engine type. This will allow our system to find parts for your vehicle.
Choose a car by KBA.
Choose an engine.
View search
Hide search
Items for cross-reference number 36254
General information
| Code: | 2.91213 |
| Brand: | DT Spare Parts |
| Title: | Repair Kit, injector holder |
| Car: | VOLVO |
| Weight : | 0,13 kg |
Criteria
| Warranty: | 2 years warranty |
| Weight [g]: | 130 g |
| For OE number: | 273983 |
Show all
Show less
General information
| Code: | 302015100026 |
| Brand: | MAGNETI MARELLI |
| Title: | Joint Kit, drive shaft |
| Car: | AUDI |
| Weight : | 2,71 kg |
Criteria
| Fitting Position: | Front Axle |
| Length [mm]: | 63 mm |
| External Toothing wheel side: | 38 |
| External Toothing differential side: | 27 |
| Seal Diameter [mm]: | 59,5 mm |
| Specification: | BELL PIN LENGTH - 34 |
Show all
Show less
General information
| Code: | FE104383 |
| Brand: | FEBI BILSTEIN |
| Title: | Mounting, engine |
| Car: | FORD |
| Weight : | 1,80 kg |
Criteria
| External Thread Size: | M12 x 1,75 |
| Fitting Position: | both sides |
| Mounting Type: | Hydro Mount |
| Weight [kg]: | 1,800 kg |
| General Information: | These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions. |
Show all
Show less
General information
| Code: | FE11868 |
| Brand: | FEBI BILSTEIN |
| Title: | Seal, injector holder |
| Car: | VOLVO |
| Weight : | 0,00 kg |
Criteria
| Thickness [mm]: | 5 mm |
| Inner Diameter [mm]: | 24 mm |
| Outer Diameter [mm]: | 33 mm |
| Weight [kg]: | 0,002 kg |
| General Information: | These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions. |
Show all
Show less
General information
| Code: | FE11869 |
| Brand: | FEBI BILSTEIN |
| Title: | Seal, injector holder |
| Car: | VOLVO |
| Weight : | 0,05 kg |
Criteria
| Thickness [mm]: | 12 mm |
| Inner Diameter [mm]: | 21 mm |
| Outer Diameter [mm]: | 32 mm |
| Weight [kg]: | 0,05 kg |
| General Information: | These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions. |
Show all
Show less
General information
| Code: | FE47962 |
| Brand: | FEBI BILSTEIN |
| Title: | Sleeve, nozzle holder |
| Car: | VOLVO |
| Weight : | 0,09 kg |
Criteria
| Length [mm]: | 115 mm |
| Width [mm]: | 25 mm |
| Thickness [mm]: | 25 mm |
| Material: | Copper |
| Outer Diameter 1 [mm]: | 12 mm |
| Outer Diameter 2 [mm]: | 25 mm |
| Inner Diameter 1 [mm]: | 22 mm |
| Inner Diameter 2 [mm]: | 8 mm |
| Weight [kg]: | 0,092 kg |
| General Information: | These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions. |
Show all
Show less
General information
| Code: | FE49250 |
| Brand: | FEBI BILSTEIN |
| Title: | Sleeve, nozzle holder |
| Car: | VOLVO |
| Weight : | 0,13 kg |
Criteria
| Weight [kg]: | 0,127 kg |
| General Information: | These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions. |
General information
| Code: | N152/5 STD |
| Brand: | GLYCO |
| Title: | Camshaft Bearing |
| Car: | RENAULT |
| Weight : | 0,00 kg |
Criteria
| Component Number: | 3066DR |
| Component Number: | 3067DR |
| Component Number: | 3068DR |
| Component Number: | 3069DR |
| Standard Size [STD]: | yes |
Show all
Show less