Search by vehicle
Search by KBA
Search by engine
Choose your car manufacturer, model and engine type. This will allow our system to find parts for your vehicle.
Choose a car by KBA.
Choose an engine.
View search
Hide search
Items for cross-reference number 350003
General information
| Code: | 352317100950 |
| Brand: | MAGNETI MARELLI |
| Title: | Thermostat, coolant |
| Car: | FIAT |
| Weight : | 0,31 kg |
Criteria
| Supplementary Article/Supplementary Info: | with seal |
| Supplementary Article/Info 2: | with sensor |
| Opening Temperature [°C]: | 88 °C |
Show all
Show less
General information
| Code: | 430719109700 |
| Brand: | MAGNETI MARELLI |
| Title: | Gas Spring, bonnet |
| Car: | RENAULT |
| Weight : | 0,18 kg |
Criteria
| Length [mm]: | 264 mm |
| Housing Diameter [mm]: | 18,5 mm |
| Stroke [mm]: | 88 mm |
| Piston Rod Diameter [mm]: | 8 mm |
| Eject Force [N]: | 355 N |
Show all
Show less
General information
| Code: | FE172093 |
| Brand: | FEBI BILSTEIN |
| Title: | Mount, exhaust system |
| Car: | PEUGEOT |
| Weight : | 0,18 kg |
Criteria
| Material: | EPDM (ethylene propylene diene Monomer (M-class) rubber) |
| Material: | Aluminium |
| Fitting Position: | Rear |
| Fitting Position: | Centre |
| Weight [kg]: | 0,176 kg |
| General Information: | These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions. |
Show all
Show less
General information
| Code: | FE36284 |
| Brand: | FEBI BILSTEIN |
| Title: | Thermostat Housing |
| Car: | FIAT |
| Weight : | 0,30 kg |
Criteria
| Opening Temperature [°C]: | 88 °C |
| Number of connectors: | 2 |
| Weight [kg]: | 0,30 kg |
| Supplementary Article/Supplementary Info: | with seal |
| Supplementary Article/Info 2: | with Temperature Switch |
| Observe service information: | yes |
| General Information: | These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions. |
Show all
Show less
General information
| Code: | HOF8192561 |
| Brand: | HOFFER |
| Title: | Thermostat, coolant |
| Car: | OPEL |
| Weight : | 0,45 kg |
Criteria
| Opening Temperature [°C]: | 88 °C |
| Supplementary Article/Info 2: | with sensor |
General information
| Code: | TI17388 |
| Brand: | MAHLE |
| Title: | Thermostat, coolant |
| Car: | ALFA ROMEO |
| Weight : | 0,38 kg |
Criteria
| Opening Temperature [°C]: | 88 °C |
| Supplementary Article/Supplementary Info: | with seal |
| Packaging width [cm]: | 11,20 cm |
| Packaging height [cm]: | 11,20 cm |
| Packaging length [cm]: | 12,0 cm |
| Net Weight [g]: | 286 g |
Show all
Show less
Netto price:
$73.14
($73.14 without VAT 0%)
Your price:
-30%
$51.20
($51.20 without VAT 0%)
| Warehouse: | 0 pcs | |
| Supplier: | Check |
General information
| Code: | 92774600 |
| Brand: | KOLBENSCHMIDT |
| Title: | Complete piston with rings and pin |
| Car: | IHC |
| Weight : | 1,88 kg |
General information
| Code: | V10-1664 |
| Brand: | VAICO |
| Title: | Spring Seat |
| Car: | ŠKODA-VW |
| Weight : | 0,00 kg |
Criteria
| Inner Diameter [mm]: | 22 mm |
| Outer Diameter [mm]: | 92 mm |
| Fitting Position: | Upper |
| Fitting Position: | Front Axle |
| Weight [kg]: | 0,144 kg |
| General Information: | Products supplied by us are without exception intended for the designated use. Please note that our products are usually delivered without installation instructions. Installation may only be carried out by trained specialist personnel. There is no guarantee for inappropriate, improper or unintended use. |
| General Information: | In the warranty, we always make a distinction between wear parts and vehicle parts. All wear parts are subject to a reduced warranty period and a maximum mileage. Brake components such as brake disks, brake pads, etc. maximum of 1000 km (break-in period). Therefore, warranty claims for brake parts are only reviewed with an installation invoice and a record of the wheel hub run-out measurement, including photos. For brake disks and brake pads, the break-in requirements specified by the vehicle manufacturer must be observed. When replacing brakes, the chassis components must always be checked with regard to clearance and the wheel hub with regard to wobble, and the appropriate documentation must be produced. If the vehicle is no longer in its original condition due to tuning work such as wheel accessories and tracking plates, the entitlement to make warranty claims is lost due to third-party work. The same warranty claims are lost if the vehicle is used for motor sports or similar events. |
Show all
Show less