Search by vehicle
Search by KBA
Search by engine
Choose your car manufacturer, model and engine type. This will allow our system to find parts for your vehicle.
Choose a car by KBA.
Choose an engine.
View search
Hide search
Items for cross-reference number 305134
General information
| Code: | 357078070100 |
| Brand: | MAGNETI MARELLI |
| Title: | Shock Absorber |
| Car: | OPEL |
| Weight : | 3,73 kg |
Criteria
| Fitting Position: | Front Axle Right |
| Length [mm]: | 538 mm |
| Length 2 [mm]: | 353 mm |
| Shock Absorber Design: | Suspension Strut |
| Shock Absorber Mounting Type: | Top pin |
| Shock Absorber Mounting Type: | Bottom Clamp |
| Shock Absorber Type: | Gas Pressure |
| Shock Absorber System: | Twin-Tube |
| Diameter 1 [mm]: | 51 mm |
| Diameter 2 [mm]: | 32 mm |
| Paired article number: | 357078070200 |
| Spring Type: | for vehicles with coil spring suspension |
Show all
Show less
General information
| Code: | EPP-RE-000 |
| Brand: | NTY |
| Title: | Mass Air Flow Sensor |
| Car: | RENAULT LAGUNA II 1.9DCI,2.2DCI 2001-,ESPACE 2.2DCI 2002- |
| Weight : | 0,28 kg |
Criteria
| Housing Type: | with housing |
| Fabrication Number: | EPP-RE-000 |
General information
| Code: | FE106521 |
| Brand: | FEBI BILSTEIN |
| Title: | Mass Air Flow Sensor |
| Car: | RENAULT |
| Weight : | 0,25 kg |
Criteria
| Resistor Type: | Hot-wire Sensor |
| Number of connectors: | 6 |
| Weight [kg]: | 0,247 kg |
| For OE number: | 77 00 314 057 |
| Housing Type: | with housing |
| General Information: | These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions. |
Show all
Show less
General information
| Code: | FE193094 |
| Brand: | FEBI BILSTEIN |
| Title: | Thermostat, coolant |
| Car: | FORD |
| Weight : | 0,32 kg |
Criteria
| Opening Temperature [°C]: | 88 °C |
| Weight [kg]: | 0,323 kg |
| Supplementary Article/Info 2: | with sensor |
| Supplementary Article/Supplementary Info: | with seal |
| Housing Type: | with housing |
| General Information: | These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions. |
Show all
Show less