Search by vehicle
Search by KBA
Search by engine
Choose your car manufacturer, model and engine type. This will allow our system to find parts for your vehicle.
Choose a car by KBA.
Choose an engine.
View search
Hide search
Items for cross-reference number 303451
General information
| Code: | 21946 |
| Brand: | SPIDAN |
| Title: | Joint Kit, drive shaft |
| Car: | VW |
| Weight : | 2,30 kg |
Criteria
| Joint Type: | CV Joint |
| External Toothing wheel side: | 38 |
| Internal Toothing wheel side: | 27 |
| Number of Teeth, ABS ring: | 48 |
| ABS Ring Ø [mm]: | 104 mm |
| Seal Diameter [mm]: | 60 mm |
| Machined: | without groove in internal component |
| Joint Diameter [mm]: | 98 mm |
| Length [mm]: | 99 mm |
| Thread Size: | M16x1.5x77 |
| Bellows Material: | NBR (nitrile butadiene rubber) |
| New Part: | yes |
| Supplementary Article/Info 2: | with screw |
| Technical Information: | Please observe the specific technical specifications for the joint. Here, a bending angle greater than 50° is required! |
Show all
Show less
General information
| Code: | 302015100304 |
| Brand: | MAGNETI MARELLI |
| Title: | Joint Kit, drive shaft |
| Car: | VW |
| Weight : | 2,93 kg |
Criteria
| Fitting Position: | Front Axle |
| Length [mm]: | 65 mm |
| External Toothing wheel side: | 38 |
| External Toothing differential side: | 27 |
| Seal Diameter [mm]: | 60,2 mm |
| Specification: | BELL PIN LENGTH - 34 |
Show all
Show less
General information
| Code: | FE39893 |
| Brand: | FEBI BILSTEIN |
| Title: | Sensor, crankshaft pulse |
| Car: | ŠKODA-VW |
| Weight : | 0,07 kg |
Criteria
| Length [mm]: | 340 mm |
| Number of connectors: | 3 |
| Weight [kg]: | 0,07 kg |
| Supplementary Article/Info 2: | with seal ring |
| General Information: | These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions. |
Show all
Show less