Search by vehicle
Search by KBA
Search by engine
Choose your car manufacturer, model and engine type. This will allow our system to find parts for your vehicle.
Choose a car by KBA.
Choose an engine.
View search
Hide search
Items for cross-reference number 30000
General information
| Code: | 50013074 |
| Brand: | KOLBENSCHMIDT |
| Title: | Fuel Filter |
| Car: | ŠKODA-VW |
| Weight : | 0,01 kg |
Criteria
| Filter type: | In-Line Filter |
| Outer Diameter 1 [mm]: | 31 mm |
| Outlet Ø [mm]: | 6 mm |
| Thread Size: | 6 mm |
| Height [mm]: | 108 mm |
Show all
Show less
General information
| Code: | 0986019030 |
| Brand: | BOSCH |
| Title: | Starter |
| Car: | ROVER |
| Weight : | 3,18 kg |
Criteria
| Service exchange part: | yes |
| Voltage [V]: | 12 V |
| Rated Power [kW]: | 0,9 kW |
| Number of mounting bores: | 3 |
| Number of threaded holes: | |
| Number of Teeth: | 9 |
| Clamp: | 50 |
| Clamp: | 30 |
| Flange Ø [mm]: | 67 mm |
| Rotation Direction: | Anticlockwise rotation |
| Pinion Rest Position [mm]: | 42 mm |
| Starter Type: | Self-supporting |
| Bore Ø [mm]: | 11 mm |
| Bore Ø 2 [mm]: | 11 mm |
| Bore Ø 3 [mm]: | 11 mm |
| Length [mm]: | 233 mm |
| Position/Degree: | rechts ° |
| Mounting Angle [degrees]: | 37 ° |
| Jaw opening angle measurement [Degree]: | 130 ° |
| Fastening hole angle measurement [Degree]: | 37 ° |
Show all
Show less
General information
| Code: | 172100000010 |
| Brand: | MAGNETI MARELLI |
| Title: | Sensor, wheel speed |
| Car: | ŠKODA-VW |
| Weight : | 0,00 kg |
Criteria
| Fitting Position: | Front Axle Right |
| Resistor [Ohm]: | 1100 Ohm |
| For OE number: | 1J0927804 |
| Number of pins: | 2 -pin connector |
| Number of mounting bores: | 1 |
Show all
Show less
General information
| Code: | FE105754 |
| Brand: | FEBI BILSTEIN |
| Title: | Holder, engine mounting system |
| Car: | PEUGEOT |
| Weight : | 0,50 kg |
Criteria
| Inner Diameter [mm]: | 10 mm |
| Fitting Position: | Rear |
| Weight [kg]: | 0,500 kg |
| General Information: | These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions. |
Show all
Show less
General information
| Code: | FE179507 |
| Brand: | FEBI BILSTEIN |
| Title: | Fuel Filter |
| Car: | HONDA |
| Weight : | 0,05 kg |
Criteria
| Filter type: | In-Line Filter |
| Length [mm]: | 100,5 mm |
| Outer Diameter [mm]: | 54,5 mm |
| Pipe Ø [mm]: | 8 mm |
| Weight [kg]: | 0,045 kg |
| General Information: | These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions. |
Show all
Show less
General information
| Code: | FE27527 |
| Brand: | FEBI BILSTEIN |
| Title: | Belt Tensioner, V-ribbed belt |
| Car: | MERCEDES |
| Weight : | 1,22 kg |
Criteria
| Width of castor bearing surface [mm]: | 30 mm |
| Housing material: | Aluminium |
| Track rollers material: | Metal |
| Outer Diameter [mm]: | 65 mm |
| Material: | Metal |
| Operating Mode: | Automatic |
| Weight [kg]: | 1,223 kg |
| For OE number: | 642 200 13 70 |
| Observe service information: | yes |
| General Information: | These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions. |
Show all
Show less
General information
| Code: | HOF8290001 |
| Brand: | HOFFER |
| Title: | Sensor, wheel speed |
| Car: | ŠKODA-VW |
| Weight : | 0,05 kg |
Criteria
| Fitting Position: | Front Axle Right |
| Supplementary Article/Info 2: | without cable |
| Number of pins: | 2 -pin connector |
| Connector Shape: | oval |
| Sensor Type: | Inductive Sensor |
| Resistor [kOhm]: | 1,1 kOhm |
| Number of mounting bores: | 1 |
| For OE number: | 1J0 927 804 |
Show all
Show less
General information
| Code: | HOFH5010227 |
| Brand: | HOFFER |
| Title: | Starter |
| Weight : | 3,30 kg |
Criteria
| Voltage [V]: | 12 V |
| Rated Power [kW]: | 0,9 kW |
| Flange Ø [mm]: | 67 mm |
| Plug Type ID: | 30-50 |
| Number of Teeth: | 9 |
| Number of mounting bores: | 2 |
| Pinion Rest Position [mm]: | 44 mm |
| Rotation Direction: | Anticlockwise rotation |
Show all
Show less
General information
| Code: | MEC30000 |
| Brand: | MEC-DIESEL |
| Title: | Crankcase |
| Car: | Fiat Ducato Iveco Daily-II/III/V/VI F1AE0481* F1AE3481* F1AFL411* 2,3JTD |
| Weight : | 70,00 kg |
Criteria
| Cylinder Bore [mm]: | 88 mm |
General information
| Code: | RNK-CH-019 |
| Brand: | NTY |
| Title: | Tensioner Pulley, V-ribbed belt |
| Car: | CHRYSLER 300 C, JEEP COMMANDER, GRAND CHEROKEE III, MERCEDES C T-MODEL (S203), C T-MODEL (S204), C (W203), C (W204), CLK (A209), CLK (C209), CLS (C219) 3.0D 01.05- |
| Weight : | 0,21 kg |
Criteria
| Width [mm]: | 30 mm |
| Material: | Metal |
| Inner Diameter [mm]: | 17 mm |
| Outer Diameter [mm]: | 65,5 mm |
| Fabrication Number: | RNK-CH-019 |
Show all
Show less