Search by vehicle
Search by KBA
Search by engine
Choose your car manufacturer, model and engine type. This will allow our system to find parts for your vehicle.
Choose a car by KBA.
Choose an engine.
View search
Hide search
Items for cross-reference number 30-0064
General information
| Code: | FE11444 |
| Brand: | FEBI BILSTEIN |
| Title: | Thermostat, coolant |
| Car: | BMW |
| Weight : | 0,10 kg |
Criteria
| Opening Temperature [°C]: | 88 °C |
| Weight [kg]: | 0,096 kg |
| Supplementary Article/Info 2: | with seal ring |
| Observe service information: | yes |
| General Information: | These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions. |
Show all
Show less
General information
| Code: | FE14906 |
| Brand: | FEBI BILSTEIN |
| Title: | Bellow Kit, drive shaft |
| Car: | CITROEN |
| Weight : | 0,21 kg |
Criteria
| Length [mm]: | 94 mm |
| Material: | Rubber |
| Fitting Position: | Front Axle |
| Fitting Position: | transmission sided |
| Inner Diameter 1 [mm]: | 29 mm |
| Inner Diameter 2 [mm]: | 75 mm |
| Weight [kg]: | 0,21 kg |
| Observe service information: | yes |
| General Information: | These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions. |
Show all
Show less
General information
| Code: | FE34196 |
| Brand: | FEBI BILSTEIN |
| Title: | Belt Pulley, crankshaft |
| Car: | OPEL |
| Weight : | 1,27 kg |
Criteria
| Thickness [mm]: | 28,5 mm |
| Inner Diameter [mm]: | 48 mm |
| Outer Diameter [mm]: | 153 mm |
| Colour: | black |
| Material: | EPDM (ethylene propylene diene Monomer (M-class) rubber) |
| Hole Spacing [mm]: | 62 mm |
| Number of ribs: | 5 |
| Weight [kg]: | 1,27 kg |
| Parameter: | 6PK |
| General Information: | These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions. |
Show all
Show less
General information
| Code: | SA20-1023 |
| Brand: | FRECCIA |
| Title: | Shock Absorber |
| Car: | FIAT |
| Weight : | 0,00 kg |
Criteria
| Shock Absorber System: | Twin-Tube |
| Shock Absorber Design: | Telescopic Shock Absorber |
| Shock Absorber Mounting Type: | Top pin |
| Shock Absorber Mounting Type: | Bottom eye |
| Shock Absorber Type: | Gas Pressure |
| Fitting Position: | 1st rear axle |
Show all
Show less