Search by vehicle
Search by KBA
Search by engine
Choose your car manufacturer, model and engine type. This will allow our system to find parts for your vehicle.
Choose a car by KBA.
Choose an engine.
View search
Hide search
Items for cross-reference number 3.11009
General information
Code: | 354320070000 |
Brand: | MAGNETI MARELLI |
Title: | Shock Absorber |
Car: | VW |
Weight : | 1,85 kg |
Criteria
Fitting Position: | Rear Axle |
Shock Absorber Design: | Telescopic Shock Absorber |
Shock Absorber Mounting Type: | Bottom eye |
Shock Absorber Mounting Type: | Top pin |
Shock Absorber Type: | Gas Pressure |
Shock Absorber System: | Twin-Tube |
Spring Type: | for vehicles with coil spring suspension |
Show all
Show less
General information
Code: | 354320079000 |
Brand: | MAGNETI MARELLI |
Title: | Shock Absorber |
Car: | VW |
Weight : | 1,85 kg |
Criteria
Fitting Position: | Rear Axle |
Shock Absorber Design: | Spring-bearing Damper |
Shock Absorber Mounting Type: | Top pin |
Shock Absorber Type: | Gas Pressure |
Shock Absorber System: | Twin-Tube |
Spring Type: | for vehicles with coil spring suspension |
Show all
Show less
General information
Code: | FE101422 |
Brand: | FEBI BILSTEIN |
Title: | Sensor, coolant level |
Car: | IVECO |
Weight : | 0,10 kg |
Criteria
Length [mm]: | 346 mm |
Outer Diameter [mm]: | 24 mm |
Number of connectors: | 2 |
Screw length below head [mm]: | 146 mm |
Weight [kg]: | 0,1 kg |
General Information: | These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions. |
Show all
Show less
General information
Code: | FE30659 |
Brand: | FEBI BILSTEIN |
Title: | Flywheel |
Car: | MAN |
Weight : | 37,27 kg |
Criteria
Hub Inner Diameter [mm]: | 47 mm |
Number of EDC bores/notches: | 58 |
Hub fastening hole diameter [mm]: | 17,2 mm |
Hub Outer Diameter [mm]: | 62 mm |
Pitch circle diameter, hub [mm]: | 88 mm |
Number of hub fastening holes: | 10 mm |
Pitch circle diameter, clutch pressure plate [mm]: | 450 mm |
Inner Diameter Tread [mm]: | 235 mm |
Clutch Pressure Plate Outer Diameter [mm]: | 475 mm |
Number of clutch pressure plate fastening holes: | 12 mm |
Number of Teeth: | 160 |
Weight [kg]: | 37,272 kg |
Supplementary Article/Supplementary Info: | with starter motor sprocket |
For OE number: | 51.02301.5259 |
Observe service information: | yes |
General Information: | These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions. |
Show all
Show less