Search by vehicle
Search by KBA
Search by engine
Choose your car manufacturer, model and engine type. This will allow our system to find parts for your vehicle.
Choose a car by KBA.
Choose an engine.
View search
Hide search
Items for cross-reference number 25261
General information
| Code: | 302004190061 |
| Brand: | MAGNETI MARELLI |
| Title: | Drive Shaft |
| Car: | RENAULT |
| Weight : | 8,82 kg |
Criteria
| Fitting Position: | Front Axle Left |
| Length [mm]: | 743 mm |
| External Toothing wheel side: | 31 |
| External Toothing differential side: | 39 |
| Seal Diameter [mm]: | 70 mm |
| Specification: | BELL PIN LENGTH - 10 |
Show all
Show less
General information
| Code: | 360406107100 |
| Brand: | MAGNETI MARELLI |
| Title: | Brake Disc |
| Car: | FORD |
| Weight : | 6,70 kg |
Criteria
| Surface: | Uncoated |
| Machining: | High-carbon |
| Brake Disc Type: | internally vented with teardrop-shaped vents |
| Diameter [mm]: | 278 mm |
| Height [mm]: | 48,5 mm |
| Minimum thickness [mm]: | 23 mm |
| Number of Holes: | 5 |
| Bolt Hole Circle Ø [mm]: | 63,5 mm |
| Tightening Torque [Nm]: | 100 Nm |
| Brake Disc Thickness [mm]: | 25 mm |
| Outer Diameter [mm]: | 278 mm |
Show all
Show less
General information
| Code: | 361302040588 |
| Brand: | MAGNETI MARELLI |
| Title: | Brake Disc |
| Car: | FORD |
| Weight : | 6,62 kg |
Criteria
| Brake Disc Type: | internally vented |
| Diameter [mm]: | 278 mm |
| Height [mm]: | 48,5 mm |
| Minimum thickness [mm]: | 23 mm |
| Number of Holes: | 5 |
| Bolt Hole Circle Ø [mm]: | 63,5 mm |
| Tightening Torque [Nm]: | 100 Nm |
| Brake Disc Thickness [mm]: | 25 mm |
| Outer Diameter [mm]: | 278 mm |
Show all
Show less
General information
| Code: | FE01238 |
| Brand: | FEBI BILSTEIN |
| Title: | Mount, exhaust system |
| Car: | ŠKODA-VW |
| Weight : | 0,15 kg |
Criteria
| Material: | Rubber/Metal |
| Weight [kg]: | 0,151 kg |
| General Information: | These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions. |
Show all
Show less
General information
| Code: | FE179331 |
| Brand: | FEBI BILSTEIN |
| Title: | Oil Sump |
| Car: | ŠKODA-VW |
| Weight : | 2,67 kg |
Criteria
| Length [mm]: | 429 mm |
| External Thread Size: | M13 |
| Spanner Size: | 19 |
| Weight [kg]: | 2,67 kg |
| Supplementary Article/Info 2: | with bore for oil-level sensor |
| Supplementary Article/Info 2: | with seal ring |
| Supplementary Article/Supplementary Info: | with an oil drain plug |
| General Information: | These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions. |
Show all
Show less
General information
| Code: | HOF25261 |
| Brand: | HOFFER |
| Title: | Repair Kit, cable set |
| Weight : | 0,11 kg |
Criteria
| Length [mm]: | 200 mm |
| Number of pins: | 15 -pin connector |
| Fitting Position: | Rear |
| Supplementary Article/Info 2: | with bellow |
| Comfort Equipment Variant (trim package): | for vehicles with central locking |
| Number of circuits: | 15 |
| Cable insulation material: | Silicone |
| Fitting Position: | Vehicle Door |
Show all
Show less