Search by vehicle
Search by KBA
Search by engine
Choose your car manufacturer, model and engine type. This will allow our system to find parts for your vehicle.
Choose a car by KBA.
Choose an engine.
View search
Hide search
Items for cross-reference number 23987
General information
| Code: | 302015100227 |
| Brand: | MAGNETI MARELLI |
| Title: | Joint Kit, drive shaft |
| Car: | OPEL |
| Weight : | 2,23 kg |
Criteria
| Fitting Position: | Front Axle |
| Length [mm]: | 635 mm |
| External Toothing wheel side: | 33 |
| External Toothing differential side: | 24 |
| Seal Diameter [mm]: | 53 mm |
| Specification: | BELL PIN LENGTH - 93 |
Show all
Show less
General information
| Code: | 357073070000 |
| Brand: | MAGNETI MARELLI |
| Title: | Shock Absorber |
| Car: | ŠKODA-VW |
| Weight : | 2,14 kg |
Criteria
| Fitting Position: | Rear Axle |
| Length [mm]: | 578 mm |
| Length 2 [mm]: | 368 mm |
| Shock Absorber Design: | Telescopic Shock Absorber |
| Shock Absorber Mounting Type: | Bottom eye |
| Shock Absorber Mounting Type: | Top pin |
| Shock Absorber Type: | Gas Pressure |
| Shock Absorber System: | Twin-Tube |
| Diameter 1 [mm]: | 45 mm |
| Diameter 2 [mm]: | 30 mm |
| Spring Type: | for vehicles with coil spring suspension |
Show all
Show less
General information
| Code: | CVJ13-1119 |
| Brand: | FRECCIA |
| Title: | Joint Kit, drive shaft |
| Car: | OPEL |
| Weight : | 2,24 kg |
Criteria
| Internal Toothing wheel side: | 24 |
| External Toothing wheel side: | 33 |
| Seal Diameter [mm]: | 53 mm |
| Length [mm]: | 157 mm |
| Thread Size: | M22X1,5 |
| Machined: | with groove in inner part (middle) |
| Fitting Position: | Wheel Side |
Show all
Show less
General information
| Code: | FE174517 |
| Brand: | FEBI BILSTEIN |
| Title: | Radiator Hose |
| Car: | SCANIA |
| Weight : | 0,47 kg |
Criteria
| Cooling Hose: | from radiator to water pipe |
| Inner Diameter 1 [mm]: | 65 mm |
| Weight [kg]: | 0,468 kg |
| Inner Diameter 2 [mm]: | 55 mm |
| General Information: | These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions. |
Show all
Show less
General information
| Code: | FE23987 |
| Brand: | FEBI BILSTEIN |
| Title: | Mounting, engine |
| Car: | RENAULT |
| Weight : | 0,96 kg |
Criteria
| External Thread Size: | M10 x 1,5 |
| Fitting Position: | Right |
| Mounting Type: | Hydro Mount |
| Weight [kg]: | 0,960 kg |
| General Information: | These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions. |
Show all
Show less
General information
| Code: | FE36933 |
| Brand: | FEBI BILSTEIN |
| Title: | Deflection/Guide Pulley, V-ribbed belt |
| Car: | MERCEDES |
| Weight : | 0,15 kg |
Criteria
| Width of castor bearing surface [mm]: | 28 mm |
| Outer Diameter [mm]: | 76 mm |
| Material: | Plastic |
| Weight [kg]: | 0,152 kg |
| General Information: | These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions. |
Show all
Show less
General information
| Code: | RNK-ME-027 |
| Brand: | NTY |
| Title: | Deflection Pulley/Guide Pulley, V-belt |
| Car: | MERCEDES C (CL203), C T-MODEL (S203), C T-MODEL (S204), C (W203), C (W204), CLC (CL203), CLK (A209), CLK (C209), E T-MODEL (S211) 1.6-1.8LPG 05.02- |
| Weight : | 0,17 kg |
Criteria
| Width [mm]: | 28 mm |
| Outer Diameter [mm]: | 76 mm |
| Fabrication Number: | RNK-ME-027 |
Show all
Show less