Search by vehicle
Search by KBA
Search by engine
Choose your car manufacturer, model and engine type. This will allow our system to find parts for your vehicle.
Choose a car by KBA.
Choose an engine.
View search
Hide search
Items for cross-reference number 2385020
General information
Code: | FE186393 |
Brand: | FEBI BILSTEIN |
Title: | Repair Kit, oil separator (crankcase ventilation) |
Car: | ŠKODA-VW |
Weight : | 0,71 kg |
Criteria
Housing material: | Plastic |
Housing Colour: | black |
Supplementary Article/Supplementary Info: | with hose |
Supplementary Article/Info 2: | with clamps |
Weight [kg]: | 0,708 kg |
General Information: | These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions. |
Show all
Show less
General information
Code: | FE38773 |
Brand: | FEBI BILSTEIN |
Title: | Oil Separator, crankcase ventilation |
Car: | ŠKODA-VW |
Weight : | 0,32 kg |
Criteria
Housing material: | Plastic |
Housing Colour: | black |
Weight [kg]: | 0,317 kg |
General Information: | These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions. |
Show all
Show less
General information
Code: | V10-0899 |
Brand: | VAICO |
Title: | Oil Separator, crankcase ventilation |
Car: | ŠKODA-VW |
Weight : | 0,00 kg |
Criteria
Operating Mode: | Pressure Controlled |
Article number of recommended accessories: | V10-3240 |
Fitting Position: | engine sided |
Width [mm]: | 142,0 mm |
Recommended change interval [years]: | 3 Years |
Observe service information: | yes |
Length [mm]: | 184 mm |
Height [mm]: | 180 mm |
Supplementary Article/Supplementary Info: | with seal |
Recommended change interval [km]: | 60000 km |
Seal Material: | FPM (fluoride rubber)/ACM (polyacrylate rubber) |
Valve type: | Breather Valve |
Observe the vehicle manufacturer specifications: | yes |
Housing material: | Polyamid 6.6 |
Weight [kg]: | 0,4998 kg |
General Information: | Products supplied by us are without exception intended for the designated use. Please note that our products are usually delivered without installation instructions. Installation may only be carried out by trained specialist personnel. There is no guarantee for inappropriate, improper or unintended use. |
General Information: | In the warranty, we always make a distinction between wear parts and vehicle parts. All wear parts are subject to a reduced warranty period and a maximum mileage. Brake components such as brake disks, brake pads, etc. maximum of 1000 km (break-in period). Therefore, warranty claims for brake parts are only reviewed with an installation invoice and a record of the wheel hub run-out measurement, including photos. For brake disks and brake pads, the break-in requirements specified by the vehicle manufacturer must be observed. When replacing brakes, the chassis components must always be checked with regard to clearance and the wheel hub with regard to wobble, and the appropriate documentation must be produced. If the vehicle is no longer in its original condition due to tuning work such as wheel accessories and tracking plates, the entitlement to make warranty claims is lost due to third-party work. The same warranty claims are lost if the vehicle is used for motor sports or similar events. |
Show all
Show less