Search by vehicle
Search by KBA
Search by engine
Choose your car manufacturer, model and engine type. This will allow our system to find parts for your vehicle.
Choose a car by KBA.
Choose an engine.
View search
Hide search
Items for cross-reference number 22576
General information
| Code: | 7.05656.80.0 |
| Brand: | PIERBURG |
| Title: | Fuel Feed Unit |
| Car: | NISSAN |
| Weight : | 1,11 kg |
Criteria
| Operating Mode: | Electric |
| Diameter [mm]: | 137 mm |
| Total Length [mm]: | 228,5 mm |
| Current Strength to [A]: | 3,85 A |
| Pressure [bar]: | 3,5 bar |
| Pressure [psi]: | 50,8 psi |
| Voltage [V]: | 13 V |
Show all
Show less
General information
| Code: | 302004190059 |
| Brand: | MAGNETI MARELLI |
| Title: | Drive Shaft |
| Car: | FORD |
| Weight : | 6,33 kg |
Criteria
| Fitting Position: | Front Axle Left |
| Length [mm]: | 613 mm |
| External Toothing wheel side: | 25 |
| External Toothing differential side: | 26 |
| Seal Diameter [mm]: | 53,4 mm |
| Specification: | BELL PIN LENGTH - 88 |
Show all
Show less
General information
| Code: | FE22576 |
| Brand: | FEBI BILSTEIN |
| Title: | Pump, fuel pre-supply |
| Car: | MERCEDES |
| Weight : | 1,00 kg |
Criteria
| Filter type: | with sight glass |
| Internal Thread Size: | M14 x 1,5 |
| Material: | Cast Steel |
| Supplementary Article/Info 2: | with fastening clamp |
| Weight [kg]: | 1,000 kg |
| Observe dimensions: | yes |
| Supplementary Article/Supplementary Info: | with gaskets/seals |
| Supplementary Article/Info 2: | with pre-filter |
| General Information: | These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions. |
Show all
Show less
General information
| Code: | FE36139 |
| Brand: | FEBI BILSTEIN |
| Title: | Radiator Hose |
| Car: | MERCEDES |
| Weight : | 0,38 kg |
Criteria
| Length [mm]: | 480 mm |
| Inner Diameter [mm]: | 37 mm |
| Inner Diameter [mm]: | 42 mm |
| Cooling Hose: | from engine to engine cooler |
| Fitting Position: | Upper |
| Weight [kg]: | 0,375 kg |
| General Information: | These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions. |
Show all
Show less