Search by vehicle
Search by KBA
Search by engine
Choose your car manufacturer, model and engine type. This will allow our system to find parts for your vehicle.
Choose a car by KBA.
Choose an engine.
View search
Hide search
Items for cross-reference number 21746
General information
Code: | 302015100062 |
Brand: | MAGNETI MARELLI |
Title: | Joint Kit, drive shaft |
Car: | CITROEN |
Weight : | 2,23 kg |
Criteria
Fitting Position: | Front Axle |
Length [mm]: | 55 mm |
External Toothing wheel side: | 28 |
External Toothing differential side: | 34 |
Seal Diameter [mm]: | 58,5 mm |
Specification: | BELL PIN LENGTH - 92 |
Show all
Show less
General information
Code: | FE01282 |
Brand: | FEBI BILSTEIN |
Title: | Water Pump, engine cooling |
Car: | FORD |
Weight : | 0,92 kg |
Criteria
Water pump impeller material: | Plastic |
Seal Material: | Paper |
Material: | Cast Aluminium |
Number of Teeth: | 20 |
Number of blades/vanes: | 8 |
Weight [kg]: | 0,919 kg |
Supplementary Article/Supplementary Info: | with seal |
Observe service information: | yes |
General Information: | These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions. |
Show all
Show less
General information
Code: | RNK-AU-005 |
Brand: | NTY |
Title: | Tensioner Pulley, V-ribbed belt |
Car: | AUDI A3 1.9TDI 2000-,FORD GALAXY 1.9TDI 2000-,SKODA OCTAVIA 1.9TDI 2002-,VW GOLF IV 1.9TDI 1998- |
Weight : | 0,13 kg |
Criteria
Width [mm]: | 24 mm |
Outer Diameter [mm]: | 70 mm |
Supplementary Article/Supplementary Info: | without holder |
Fabrication Number: | RNK-AU-005 |
Show all
Show less
General information
Code: | RNK-AU-013 |
Brand: | NTY |
Title: | Tensioner Pulley, V-ribbed belt |
Car: | AUDI A3, FORD GALAXY, SEAT ALHAMBRA, LEON, TOLEDO II, SKODA OCTAVIA I, VW BORA, GOLF IV, MULTIVAN V, NEW BEETLE, SHARAN, TRANSPORTER V 1.9D 03.95-09.10 |
Weight : | 0,13 kg |
Criteria
Diameter [mm]: | 70 mm |
Width [mm]: | 24 mm |
Tensioner Pulley Actuation: | Automatic |
Fabrication Number: | RNK-AU-013 |
Show all
Show less