Search by vehicle
Search by KBA
Search by engine
Choose your car manufacturer, model and engine type. This will allow our system to find parts for your vehicle.
Choose a car by KBA.
Choose an engine.
View search
Hide search
Items for cross-reference number 19119
General information
| Code: | FE106801 |
| Brand: | FEBI BILSTEIN |
| Title: | Sensor, crankshaft pulse |
| Car: | RENAULT |
| Weight : | 0,05 kg |
Criteria
| Number of connectors: | 2 |
| Weight [kg]: | 0,05 kg |
| Supplementary Article/Info 2: | with seal ring |
| General Information: | These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions. |
Show all
Show less
General information
| Code: | FE19119 |
| Brand: | FEBI BILSTEIN |
| Title: | Belt Tensioner, V-ribbed belt |
| Car: | PEUGEOT |
| Weight : | 0,74 kg |
Criteria
| Width of castor bearing surface [mm]: | 25 mm |
| Housing material: | Aluminium |
| Track rollers material: | Plastic |
| Outer Diameter [mm]: | 70 mm |
| Operating Mode: | Automatic |
| Weight [kg]: | 0,74 kg |
| For OE number: | 16 138 399 80 |
| Observe service information: | yes |
| General Information: | These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions. |
Show all
Show less
General information
| Code: | HOF7517463 |
| Brand: | HOFFER |
| Title: | Sensor, crankshaft pulse |
| Car: | GM |
| Weight : | 0,06 kg |
Criteria
| Number of pins: | 2 -pin connector |
| Connector Shape: | angular |
| Supplementary Article/Info 2: | without cable |
| Number of mounting bores: | 1 |
| Sensor Type: | Inductive Sensor |
| Resistor [Ohm]: | 850 Ohm |
| Fitting Depth [mm]: | 44 mm |
| For OE number: | 4433781 |
| For OE number: | 82 00 668 500 |
Show all
Show less
General information
| Code: | RNK-CT-015 |
| Brand: | NTY |
| Title: | Tensioner Pulley, V-ribbed belt |
| Car: | CITROEN BERLINGO, C5 I, C5 II, C8, EVASION, JUMPER, JUMPY, XANTIA, XSARA, XSARA PICASSO, FIAT DUCATO, SCUDO, ULYSSE, LANCIA PHEDRA, ZETA 2.0D/2.2D 06.98- |
| Weight : | 0,13 kg |
Criteria
| Width [mm]: | 24,5 mm |
| Material: | Plastic |
| Inner Diameter [mm]: | 17 mm |
| Outer Diameter [mm]: | 70 mm |
| Fabrication Number: | RNK-CT-015 |
Show all
Show less