Search by vehicle
Search by KBA
Search by engine
Choose your car manufacturer, model and engine type. This will allow our system to find parts for your vehicle.
Choose a car by KBA.
Choose an engine.
View search
Hide search
Items for cross-reference number 15-3833
General information
| Code: | 030607020501 |
| Brand: | MAGNETI MARELLI |
| Title: | Holder, engine mounting system |
| Car: | FIAT |
| Weight : | 1,20 kg |
Criteria
| Fitting Position: | Front and Rear |
General information
| Code: | 0986AH0612 |
| Brand: | BOSCH |
| Title: | Relay, main current |
| Weight : | 0,04 kg |
Criteria
| Current Strength [A]: | 10 A |
| Voltage [V]: | 24 V |
| Number of pins: | 5 -pin connector |
| Relay function: | Three-Phase Generator |
| Housing Type: | Synthetic Material Housing |
| Combi Switch Function: | without dynamic function (direction indicator) |
| Temperature range from [°C]: | -40 °C |
| Temperature range to [°C]: | 100 °C |
| Resistor [Ohm]: | 360 Ohm |
| Supplementary Article/Supplementary Info: | with suppression diode |
| Housing Colour: | black |
Show all
Show less
General information
| Code: | FE171323 |
| Brand: | FEBI BILSTEIN |
| Title: | Mounting, engine |
| Car: | FIAT |
| Weight : | 1,19 kg |
Criteria
| Fitting Position: | Rear |
| Mounting Type: | Rubber-Metal Mount |
| Weight [kg]: | 1,190 kg |
| General Information: | These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions. |
Show all
Show less
General information
| Code: | FE38972 |
| Brand: | FEBI BILSTEIN |
| Title: | Belt Tensioner, V-ribbed belt |
| Car: | ŠKODA-VW |
| Weight : | 0,50 kg |
Criteria
| Width of castor bearing surface [mm]: | 24 mm |
| Housing material: | Aluminium |
| Track rollers material: | Plastic |
| Outer Diameter [mm]: | 70 mm |
| Operating Mode: | Mechanical |
| Weight [kg]: | 0,5 kg |
| Observe service information: | yes |
| General Information: | These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions. |
Show all
Show less