Search by vehicle
Search by KBA
Search by engine
Choose your car manufacturer, model and engine type. This will allow our system to find parts for your vehicle.
Choose a car by KBA.
Choose an engine.
View search
Hide search
Items for cross-reference number 14491
General information
| Code: | 7.01782.07.0 |
| Brand: | PIERBURG |
| Title: | EGR Valve |
| Car: | VW |
Criteria
| Valve Type: | Control Valve |
| Operating Mode: | Electric |
| Supplementary Article/Supplementary Info: | with gasket/seal |
Show all
Show less
General information
| Code: | 030607010007 |
| Brand: | MAGNETI MARELLI |
| Title: | Holder, engine mounting system |
| Car: | CITROEN |
Criteria
| Fitting Position: | Front |
General information
| Code: | EGR-AU-018 |
| Brand: | NTY |
| Title: | EGR Valve |
| Car: | AUDI A4 2.7TDI,3.0TDI 2007-,TOUAREG 3.0TDI 2006- |
Criteria
| Supplementary Article/Supplementary Info: | without EGR cooler |
| Number of pins: | 5 -pin connector |
| Operating Mode: | Electric |
Show all
Show less
General information
| Code: | FE14491 |
| Brand: | FEBI BILSTEIN |
| Title: | Mounting, engine |
| Car: | FIAT |
Criteria
| Material: | Rubber/Metal |
| Fitting Position: | Rear |
| Mounting Type: | Rubber-Metal Mount |
| For OE number: | 1308696080 |
| Observe service information: | yes |
| General Information: | These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions. |
Show all
Show less
General information
| Code: | FE174993 |
| Brand: | FEBI BILSTEIN |
| Title: | EGR Valve |
| Car: | ŠKODA-VW |
Criteria
| Number of connectors: | 5 |
| Supplementary Article/Supplementary Info: | with gaskets/seals |
| General Information: | These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions. |
Show all
Show less
General information
| Code: | FE27215 |
| Brand: | FEBI BILSTEIN |
| Title: | Belt Pulley, crankshaft |
| Car: | OPEL |
Criteria
| Thickness [mm]: | 35 mm |
| Inner Diameter [mm]: | 35 mm |
| Outer Diameter [mm]: | 180 mm |
| Number of ribs: | 5 |
| Parameter: | 6PK |
| General Information: | These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions. |
Show all
Show less
General information
| Code: | HOF7518250 |
| Brand: | HOFFER |
| Title: | EGR Valve |
| Car: | ŠKODA-VW |
Criteria
| For OE number: | 95511105100 |
General information
| Code: | RKP-PL-001 |
| Brand: | NTY |
| Title: | Belt Pulley, crankshaft |
| Car: | OPEL ENG.2.0DI/DTI,2.2DTI ASTRA G 98-, OMEGA B 97-, VECTRA B/C 97-, SIGNUM 03-, ZAFIRA 99- |
Criteria
| Number of grooves: | 5 |
| Outer Diameter [mm]: | 180 mm |
| Inner Diameter [mm]: | 35 mm |
| Parameter: | 6PK |
Show all
Show less
General information
| Code: | FE33619 |
| Brand: | FEBI BILSTEIN |
| Title: | Centring Screw, crankshaft pulley |
| Car: | OPEL |
Criteria
| Length [mm]: | 138 mm |
| External Thread Size: | M18 x 1,5 |
| Thread Length [mm]: | 109 mm |
| Quality/ Grade: | 11.9 |
| Bolt Head-/Nut Design: | External Hexagon |
| Shaft Length [mm]: | 14 mm |
| Surface: | Phosphatized |
| Bolt/Nut Version: | with lockwasher |
| General Information: | These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions. |
Show all
Show less
General information
| Code: | FE33620 |
| Brand: | FEBI BILSTEIN |
| Title: | Belt Pulley, crankshaft |
| Tag: | ProKit |
| Car: | OPEL |
Criteria
| Width [mm]: | 35 mm |
| Inner Diameter [mm]: | 35 mm |
| Outer Diameter [mm]: | 180 mm |
| Number of ribs: | 5 |
| Parameter: | 6PK |
| Supplementary Article/Supplementary Info 2: | with screw |
| Observe service information: | yes |
| Technical Information: | Attention!: The old bolt has to be replaced with the enclosed bolt. Tightening torque specification of the vehicle manufacturer have to be obeyed. |
| General Information: | These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions. |
Show all
Show less