Search by vehicle
Search by KBA
Search by engine
Choose your car manufacturer, model and engine type. This will allow our system to find parts for your vehicle.
Choose a car by KBA.
Choose an engine.
View search
Hide search
Items for cross-reference number 10712
General information
| Code: | 2.53156 |
| Brand: | DT Spare Parts |
| Title: | Tie Rod End |
| Car: | VOLVO |
| Weight : | 0,00 kg |
Criteria
| Warranty: | 2 years warranty |
| Fitting Position: | Front Axle |
| Weight [g]: | 1600 g |
| Length [mm]: | 141 mm |
| For OE number: | 21263821 |
| Cone Size [mm]: | 28,6 mm |
| Thread Size 1: | M30 x 1,5R |
| Thread Size 2: | M20 x 1,5 |
Show all
Show less
General information
| Code: | 466016355254 |
| Brand: | MAGNETI MARELLI |
| Title: | Lambda Sensor |
| Car: | BMW |
| Weight : | 0,00 kg |
Criteria
| Resistor [Ohm]: | 2,1 Ohm |
| Length [mm]: | 800 mm |
| Conductor Number: | 4 conductor |
| Number of circuits: | 4 |
| Cable Length [mm]: | 800 mm |
| Lambda Sensor: | Heated |
Show all
Show less
General information
| Code: | FE101566 |
| Brand: | FEBI BILSTEIN |
| Title: | Starter |
| Car: | CITROEN |
| Weight : | 3,89 kg |
Criteria
| Voltage [V]: | 12 V |
| Number of Teeth: | 11 |
| Rated Power [kW]: | 1,8 kW |
| Weight [kg]: | 3,89 kg |
| General Information: | These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions. |
Show all
Show less
General information
| Code: | FE24353 |
| Brand: | FEBI BILSTEIN |
| Title: | Water Pump, engine cooling |
| Car: | TOYOTA |
| Weight : | 1,06 kg |
Criteria
| Material: | Cast Aluminium |
| Weight [kg]: | 1,060 kg |
| For OE number: | 16100-19295 |
| Supplementary Article/Supplementary Info: | with seal |
| Observe service information: | yes |
| General Information: | These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions. |
Show all
Show less
General information
| Code: | FE24378 |
| Brand: | FEBI BILSTEIN |
| Title: | Water Pump, engine cooling |
| Car: | TOYOTA |
| Weight : | 0,81 kg |
Criteria
| Water pump impeller material: | Metal |
| Seal Material: | Paper |
| Material: | Cast Aluminium |
| Number of blades/vanes: | 6 |
| Weight [kg]: | 0,810 kg |
| Supplementary Article/Supplementary Info: | with seal |
| Observe service information: | yes |
| General Information: | These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions. |
Show all
Show less
General information
| Code: | FE26872 |
| Brand: | FEBI BILSTEIN |
| Title: | Belt Pulley, crankshaft |
| Car: | ŠKODA-VW |
| Weight : | 1,40 kg |
Criteria
| Thickness [mm]: | 26 mm |
| Inner Diameter [mm]: | 30 mm |
| Outer Diameter [mm]: | 161 mm |
| Number of ribs: | 4 |
| Weight [kg]: | 1,4 kg |
| Parameter: | 5PK |
| General Information: | These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions. |
Show all
Show less
General information
| Code: | FE28203 |
| Brand: | FEBI BILSTEIN |
| Title: | Mounting, engine |
| Car: | RENAULT |
| Weight : | 1,91 kg |
Criteria
| Material: | Rubber/Metal |
| Fitting Position: | Right |
| Mounting Type: | Hydro Mount |
| Weight [kg]: | 1,910 kg |
| For OE number: | 82 00 014 931 |
| General Information: | These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions. |
Show all
Show less
General information
| Code: | FE34045 |
| Brand: | FEBI BILSTEIN |
| Title: | Mounting, engine |
| Car: | NISSAN |
| Weight : | 1,88 kg |
Criteria
| Material: | Rubber/Metal |
| Fitting Position: | Upper |
| Fitting Position: | Right |
| Mounting Type: | Hydro Mount |
| Weight [kg]: | 1,88 kg |
| General Information: | These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions. |
Show all
Show less
General information
| Code: | FE36344 |
| Brand: | FEBI BILSTEIN |
| Title: | Belt Pulley, crankshaft |
| Car: | ŠKODA-VW |
| Weight : | 1,48 kg |
Criteria
| Width [mm]: | 26 mm |
| Inner Diameter [mm]: | 30 mm |
| Outer Diameter [mm]: | 161 mm |
| Number of ribs: | 4 |
| Weight [kg]: | 1,475 kg |
| Parameter: | 5PK |
| Supplementary Article/Info 2: | with bolts/screws |
| General Information: | These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions. |
Show all
Show less