Search by vehicle
Search by KBA
Search by engine
Choose your car manufacturer, model and engine type. This will allow our system to find parts for your vehicle.
Choose a car by KBA.
Choose an engine.
View search
Hide search
Items for cross-reference number 10148
General information
Code: | FE01171 |
Brand: | FEBI BILSTEIN |
Title: | Bellow Kit, drive shaft |
Car: | AUDI |
Weight : | 0,53 kg |
Criteria
Length [mm]: | 84 mm |
Material: | Rubber |
Fitting Position: | Front Axle |
Fitting Position: | Wheel Side |
Inner Diameter 1 [mm]: | 24 mm |
Weight [kg]: | 0,53 kg |
Inner Diameter 2 [mm]: | 88 mm |
General Information: | These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions. |
Show all
Show less
General information
Code: | FE03521 |
Brand: | FEBI BILSTEIN |
Title: | Water Pump, engine cooling |
Car: | ŠKODA-VW |
Weight : | 1,16 kg |
Criteria
Water pump impeller material: | Metal |
Seal Material: | Rubber |
Material: | Cast Aluminium |
Number of Teeth: | 26 |
Number of blades/vanes: | 8 |
Weight [kg]: | 1,155 kg |
Supplementary Article/Info 2: | with seal ring |
Observe service information: | yes |
General Information: | These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions. |
Show all
Show less
General information
Code: | FE102792 |
Brand: | FEBI BILSTEIN |
Title: | Seal, injector holder |
Car: | PEUGEOT |
Weight : | 0,00 kg |
Criteria
Thickness [mm]: | 2 mm |
Inner Diameter [mm]: | 7,7 mm |
Outer Diameter [mm]: | 15 mm |
Material: | Copper |
Weight [kg]: | 0,001 kg |
General Information: | These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions. |
Show all
Show less
General information
Code: | FE102802 |
Brand: | FEBI BILSTEIN |
Title: | Seal, injector holder |
Car: | PEUGEOT |
Weight : | 0,00 kg |
Criteria
Thickness [mm]: | 2 mm |
Inner Diameter [mm]: | 7,7 mm |
Outer Diameter [mm]: | 15 mm |
Material: | Copper |
Weight [kg]: | 0,001 kg |
General Information: | These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions. |
Show all
Show less
General information
Code: | FE35572 |
Brand: | FEBI BILSTEIN |
Title: | Water Pump, engine cooling |
Car: | MERCEDES |
Weight : | 13,12 kg |
Criteria
Water pump impeller material: | Grey Cast Iron |
Seal Material: | Paper |
Material: | Grey Cast Iron |
Number of blades/vanes: | 12 |
Weight [kg]: | 13,56 kg |
Supplementary Article/Supplementary Info: | with gaskets/seals |
For OE number: | 542 200 26 01 |
Observe service information: | yes |
General Information: | These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions. |
Show all
Show less
General information
Code: | FE46152 |
Brand: | FEBI BILSTEIN |
Title: | Seal, injector holder |
Car: | DAF |
Weight : | 0,01 kg |
Criteria
Thickness [mm]: | 2 mm |
Inner Diameter [mm]: | 8 mm |
Outer Diameter [mm]: | 15 mm |
Weight [kg]: | 0,005 kg |
General Information: | These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions. |
Show all
Show less
General information
Code: | HOF25339 |
Brand: | HOFFER |
Title: | Repair Kit, cable set |
Weight : | 0,04 kg |
Criteria
Conductor Number: | 3 conductor |
Cable Length [mm]: | 265 mm |
Number of circuits: | 3 |
Plug Type: | Shrink Connector |
Cable Cross Section [mm²]: | 0,75 mm² |
Cable insulation material: | Silicone |
Material: | CuSn (copper-tin) |
Plug Type: | Male |
Show all
Show less
Netto price:
$18.24
($18.24 without VAT 0%)
Your price:
-30%
$12.77
($12.77 without VAT 0%)
Warehouse: | 0 pcs | |
Supplier: | Check |