Search by vehicle
Search by KBA
Search by engine
Choose your car manufacturer, model and engine type. This will allow our system to find parts for your vehicle.
Choose a car by KBA.
Choose an engine.
View search
Hide search
Items for cross-reference number 10.1298
General information
| Code: | 20160228662 |
| Brand: | BF |
| Title: | Water Pump, engine cooling |
| Car: | MAN |
| Weight : | 10,60 kg |
Criteria
| Operating Mode: | Mechanical |
| Impeller Diameter [mm]: | 135 mm |
| Supplementary Article/Supplementary Info: | with seal |
| For OE number: | 51.06500-6492 |
Show all
Show less
General information
| Code: | 0986475143 |
| Brand: | BOSCH |
| Title: | Wheel Brake Cylinder |
| Car: | OPEL |
| Weight : | 0,23 kg |
Criteria
| Piston Diameter [mm]: | 19,05 mm |
General information
| Code: | 360219230063 |
| Brand: | MAGNETI MARELLI |
| Title: | Wheel Brake Cylinder |
| Car: | OPEL |
| Weight : | 0,38 kg |
Criteria
| Diameter [mm]: | 19,1 mm |
General information
| Code: | F026009939 |
| Brand: | BOSCH |
| Title: | Wheel Brake Cylinder |
| Car: | CHEVROLET |
| Weight : | 0,33 kg |
Criteria
| Piston Diameter [mm]: | 19,05 mm |
General information
| Code: | FE04239 |
| Brand: | FEBI BILSTEIN |
| Title: | Water Pump, engine cooling |
| Car: | MAN |
| Weight : | 9,46 kg |
Criteria
| Water pump impeller material: | Grey Cast Iron |
| Seal Material: | Rubber |
| Material: | Grey Cast Iron |
| Number of blades/vanes: | 12 |
| Weight [kg]: | 9,46 kg |
| Supplementary Article/Supplementary Info: | with gaskets/seals |
| Observe service information: | yes |
| General Information: | These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions. |
Show all
Show less
General information
| Code: | FE103240 |
| Brand: | FEBI BILSTEIN |
| Title: | Shaft Seal, crankshaft |
| Car: | RENAULT |
| Weight : | 0,07 kg |
Criteria
| Width [mm]: | 11 mm |
| Inner Diameter [mm]: | 80 mm |
| Outer Diameter [mm]: | 100 mm |
| Material: | PTFE (polytetrafluoroethylene) |
| Fitting Position: | frontal sided |
| Weight [kg]: | 0,07 kg |
| General Information: | These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions. |
Show all
Show less
General information
| Code: | FE11360 |
| Brand: | FEBI BILSTEIN |
| Title: | Water Pump, engine cooling |
| Car: | MAN |
| Weight : | 9,45 kg |
Criteria
| Water pump impeller material: | Grey Cast Iron |
| Seal Material: | Rubber |
| Material: | Grey Cast Iron |
| Number of blades/vanes: | 12 |
| Weight [kg]: | 9,45 kg |
| Supplementary Article/Supplementary Info: | with gaskets/seals |
| For OE number: | 51.06500.6492 |
| Observe service information: | yes |
| General Information: | These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions. |
Show all
Show less
General information
| Code: | FE30170 |
| Brand: | FEBI BILSTEIN |
| Title: | Belt Tensioner, V-ribbed belt |
| Car: | IVECO |
| Weight : | 0,73 kg |
Criteria
| Width of castor bearing surface [mm]: | 25 mm |
| Housing material: | Aluminium |
| Track rollers material: | Plastic |
| Outer Diameter [mm]: | 70 mm |
| Operating Mode: | Automatic |
| Weight [kg]: | 0,73 kg |
| Observe service information: | yes |
| General Information: | These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions. |
Show all
Show less
General information
| Code: | FE37300 |
| Brand: | FEBI BILSTEIN |
| Title: | Mass Air Flow Sensor |
| Car: | PEUGEOT |
| Weight : | 0,16 kg |
Criteria
| Resistor Type: | Hot-film Sensor |
| Number of connectors: | 5 |
| Material: | Plastic |
| Weight [kg]: | 0,16 kg |
| Supplementary Article/Info 2: | Control Unit/Software must be trained/updated |
| Housing Type: | with housing |
| General Information: | These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions. |
Show all
Show less
General information
| Code: | HOF7516146 |
| Brand: | HOFFER |
| Title: | Mass Air Flow Sensor |
| Car: | FORD |
| Weight : | 0,21 kg |
Criteria
| Version: | DIGITAL |