Search by vehicle
Search by KBA
Search by engine
SAAB B201XL
Choose your car manufacturer, model and engine type. This will allow our system to find parts for your vehicle.
SAAB B201XL
Choose a car by KBA.
SAAB B201XL
Choose an engine.
View search
Hide search
Spare parts SAAB B201XL
General information
| Code: | 7.21440.51.0 |
| Brand: | PIERBURG |
| Title: | Fuel Pump |
| Car: | ŠKODA-VW |
Criteria
| Operating Mode: | Electric |
| Diameter [mm]: | 38 mm |
| Total Length [mm]: | 133,5 mm |
| Diameter 1 [mm]: | 8 mm |
| Diameter 2 [mm]: | 8 mm |
| Current Strength to [A]: | 2 A |
| Number of connectors: | 2 |
| Pressure to [bar]: | 0,1 bar |
| Voltage [V]: | 12 V |
| Fuel Type: | Petrol |
Show all
Show less
General information
| Code: | 50013081 |
| Brand: | KOLBENSCHMIDT |
| Title: | Oil Filter |
| Car: | SAAB |
Criteria
| Filter type: | Spin-on Filter |
| Outer Diameter 1 [mm]: | 76 mm |
| Inner Diameter 1 [mm]: | 62 mm |
| Outer Diameter 2 [mm]: | 72 mm |
| Thread Size: | 3/4-16 UNF |
| Height [mm]: | 79 mm |
| Bypass Valve Opening Pressure [bar]: | 1,2 bar |
| Supplementary Article/Supplementary Info 2: | with one anti-return valve |
Show all
Show less
General information
| Code: | 81-52100 |
| Brand: | TRW Engine Component |
| Title: | Valve Guide |
| Car: | SAAB |
Criteria
| Outer Diameter [mm]: | 13,05 mm |
| Bore Diameter [mm]: | 8 mm |
| Flange Diameter [mm]: | 14 mm |
| Length [mm]: | 46,8 mm |
| Material: | Grey Cast Iron with high phosphorus content and CR percent |
| Valve Type: | for inlet valves |
Show all
Show less
General information
| Code: | 181039000100 |
| Brand: | NE |
| Title: | Connecting Rod Bearing Shell Set |
| Car: | SAAB |
Criteria
| For housing diameter from [mm]: | 56 mm |
| For housing diameter up to [mm]: | 56,02 mm |
| For shaft diameter from [mm]: | 51,98 mm |
| For shaft diameter to [mm]: | 52 mm |
| Standard Size [STD]: | yes |
| Width 1 [mm]: | 20,25 mm |
Show all
Show less
General information
| Code: | 181039000115 |
| Brand: | NE |
| Title: | Connecting Rod Bearing Shell Set |
| Car: | SAAB |
Criteria
| Oversize [mm]: | 0,25 mm |
| For housing diameter from [mm]: | 56 mm |
| For housing diameter up to [mm]: | 56,02 mm |
| For shaft diameter from [mm]: | 51,73 mm |
| For shaft diameter to [mm]: | 51,75 mm |
| Width 1 [mm]: | 20,25 mm |
Show all
Show less
General information
| Code: | FE19597 |
| Brand: | FEBI BILSTEIN |
| Title: | Water Pump, engine cooling |
| Car: | SAAB |
Criteria
| Housing material: | Cast Aluminium |
| Water pump impeller material: | Plastic |
| Seal Material: | Paper |
| Number of blades/vanes: | 8 |
| Supplementary Article/Supplementary Info: | with gasket/seal |
| Observe service information: | yes |
| General Information: | These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions. |
Show all
Show less

