Search by vehicle
Search by KBA
Search by engine
MG G18DT
Choose your car manufacturer, model and engine type. This will allow our system to find parts for your vehicle.
MG G18DT
Choose a car by KBA.
MG G18DT
Choose an engine.
View search
Hide search
Spare parts MG G18DT
General information
| Code: | FE192865 |
| Brand: | FEBI BILSTEIN |
| Title: | Oil Filter |
| Car: | LANDROVER |
Criteria
| Filter type: | Spin-on Filter |
| Height [mm]: | 88 mm |
| Outer Diameter [mm]: | 76 mm |
| Internal Thread Size: | 13/16" - 16 UNF |
| Gasket inside diameter [mm]: | 62,3 mm |
| Gasket outside diameter [mm]: | 72,3 mm |
| Guarantee: | 3 years guarantee |
| General Information: | These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions. |
Show all
Show less
General information
| Code: | FE194288 |
| Brand: | FEBI BILSTEIN |
| Title: | Seal Ring, oil drain plug |
| Car: | HYUNDAI |
Criteria
| Inner Diameter [mm]: | 14,4 mm |
| Height [mm]: | 2 mm |
| Outer Diameter [mm]: | 22 mm |
| Material: | Aluminium |
| Guarantee: | 3 years guarantee |
| General Information: | These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions. |
Show all
Show less
General information
| Code: | FE45054 |
| Brand: | FEBI BILSTEIN |
| Title: | Water Pump, engine cooling |
| Car: | LANDROVER |
Criteria
| Housing material: | Cast Aluminium |
| Water pump impeller material: | Metal |
| Seal Material: | Rubber |
| Number of Teeth: | 24 |
| Number of blades/vanes: | 6 |
| Supplementary Article/Supplementary Info 2: | with seal ring |
| Observe service information: | yes |
| Guarantee: | 3 years guarantee |
| General Information: | These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions. |
Show all
Show less
General information
| Code: | 11064700 |
| Brand: | AJUSA |
| Title: | Gasket, cylinder head cover |
| Car: | ROVER |
Criteria
| Thickness [mm]: | 0,3 mm |
| Width [mm]: | 197 mm |
| Length [mm]: | 418 mm |
| Weight [g]: | 0,138 g |
Show all
Show less
General information
| Code: | 16084600 |
| Brand: | AJUSA |
| Title: | Seal Ring, injector |
| Car: | HYUNDAI |
Criteria
| Thickness [mm]: | 3,5 mm |
| Width [mm]: | 7,5 mm |
| Length [mm]: | 14,5 mm |
Show all
Show less