Search by vehicle
Search by KBA
Search by engine
MAZDA 1E12(RTK)
Choose your car manufacturer, model and engine type. This will allow our system to find parts for your vehicle.
MAZDA 1E12(RTK)
Choose a car by KBA.
MAZDA 1E12(RTK)
Choose an engine.
View search
Hide search
Spare parts MAZDA 1E12(RTK)
General information
| Code: | FE05600 |
| Brand: | FEBI BILSTEIN |
| Title: | Gasket, cylinder head cover |
| Car: | FORD |
Criteria
| Material: | Rubber |
| General Information: | These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions. |
General information
| Code: | FE05633 |
| Brand: | FEBI BILSTEIN |
| Title: | Water Pump, engine cooling |
| Car: | FORD |
Criteria
| Housing material: | Grey Cast Iron |
| Water pump impeller material: | Metal |
| Seal Material: | Paper |
| Number of blades/vanes: | 9 |
| Supplementary Article/Supplementary Info: | with gasket/seal |
| Supplementary Article/Supplementary Info 2: | with screw |
| Observe service information: | yes |
| General Information: | These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions. |
Show all
Show less
General information
| Code: | FE07811 |
| Brand: | FEBI BILSTEIN |
| Title: | Oil Pressure Switch |
| Car: | FORD |
Criteria
| Connector/Clamp: | with screw connection |
| Switch point from [bar]: | 0,2 bar |
| Switch point to [bar]: | 0,4 bar |
| External Thread Size: | 1/4" - 18 NPT |
| Spanner Size: | 24 |
| Number of connectors: | 1 |
| Supplementary Article/Supplementary Info 2: | without seal ring |
| General Information: | These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions. |
Show all
Show less
General information
| Code: | FE10132 |
| Brand: | FEBI BILSTEIN |
| Title: | Tensioner Pulley, timing belt |
| Car: | FORD |
Criteria
| Inner Diameter [mm]: | 24,8 mm |
| Outer Diameter [mm]: | 60 mm |
| Material: | Metal |
| General Information: | These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions. |
Show all
Show less
General information
| Code: | FE176111 |
| Brand: | FEBI BILSTEIN |
| Title: | Glow Plug |
| Car: | FORD |
Criteria
| Length [mm]: | 64 mm |
| Fitting Depth [mm]: | 18 mm |
| External Thread Size: | M12 x 1,25 |
| Spanner Size: | 12 |
| Voltage [V]: | 11 V |
| Glow Plug Design: | after-glow capable |
| General Information: | These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions. |
Show all
Show less
General information
| Code: | FE21096 |
| Brand: | FEBI BILSTEIN |
| Title: | Screw Plug, oil sump |
| Car: | FIAT |
Criteria
| Length [mm]: | 35 mm |
| Outer Diameter [mm]: | 28 mm |
| External Thread Size: | M14 x 1,5 |
| Thread Length [mm]: | 12 mm |
| Quality/ Grade: | 5.8 |
| Spanner Size: | 13 |
| Bolt Head-/Nut Design: | External Hexagon |
| Material: | Steel |
| Surface: | Phosphatized |
| Screw length below head [mm]: | 21 mm |
| Supplementary Article/Supplementary Info 2: | with seal ring |
| Observe service information: | yes |
| General Information: | These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions. |
Show all
Show less
General information
| Code: | FE22097 |
| Brand: | FEBI BILSTEIN |
| Title: | Mounting, engine |
| Car: | FORD |
Criteria
| Material: | Rubber/Metal |
| Fitting Position: | Right |
| Mounting Type: | Hydro Mount |
| Observe service information: | yes |
| General Information: | These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions. |
Show all
Show less
General information
| Code: | FE24467 |
| Brand: | FEBI BILSTEIN |
| Title: | Sensor, coolant temperature |
| Car: | FORD |
Criteria
| Spanner Size: | 19 |
| Number of connectors: | 2 |
| Colour: | grey |
| General Information: | These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions. |
Show all
Show less
General information
| Code: | FE24866 |
| Brand: | FEBI BILSTEIN |
| Title: | Sensor, crankshaft pulse |
| Car: | FORD |
Criteria
| Length [mm]: | 64,5 mm |
| Number of connectors: | 2 |
| General Information: | These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions. |
Show all
Show less
General information
| Code: | FE28832 |
| Brand: | FEBI BILSTEIN |
| Title: | V-ribbed Belt |
Criteria
| Length [mm]: | 885 mm |
| Material: | EPDM (ethylene propylene diene Monomer (M-class) rubber) |
| Number of ribs: | 5 |
| General Information: | These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions. |
Show all
Show less