Search by vehicle
Search by KBA
Search by engine
AUDI DMGK
Choose your car manufacturer, model and engine type. This will allow our system to find parts for your vehicle.
AUDI DMGK
Choose a car by KBA.
AUDI DMGK
Choose an engine.
View search
Hide search
Spare parts AUDI DMGK
General information
| Code: | ZH0088 |
| Brand: | ET ENGINETEAM |
| Title: | Tappet |
| Car: | Skoda VW Audi Seat 1,6/2,0TDI 2003+ |
Criteria
| Fitting Position: | Intake Side |
| Fitting Position: | Exhaust Side |
| Operating Mode: | hydraulic |
Show all
Show less
Netto price:
USD $8.33
(USD $8.33 without VAT 0%)
Your price:
-40%
USD $5.00
(USD $5.00 without VAT 0%)
| Warehouse: | > 25 pcs |
General information
| Code: | 420022210 |
| Brand: | Schaeffler INA |
| Title: | Tappet |
| Car: | Skoda VW Audi Seat 1,6/2,0TDI 2003+ |
Criteria
| Operating Mode: | hydraulic |
| Height [mm]: | 33 mm |
| Diameter [mm]: | 12 mm |
Show all
Show less
Netto price:
USD $11.90
(USD $11.90 without VAT 0%)
Your price:
-30%
USD $8.33
(USD $8.33 without VAT 0%)
price per 1 pcs
| Warehouse: | 1 pcs |
Packs of 8 pcs · opened pack in stock
General information
| Code: | 7.11492.13.0 |
| Brand: | PIERBURG |
| Title: | Sensor, exhaust pressure |
Criteria
| Sensor Type: | Differential Pressure Sensor |
| Output Voltage, up to [V]: | 5 V |
| Measuring Range to [kPa]: | 100 kPa |
| Number of pins: | 3 -pin connector |
| Number of mounting bores: | 1 |
| Supplementary Article/Supplementary Info: | without accessories |
Show all
Show less
General information
| Code: | FE1006442 |
| Brand: | FEBI BILSTEIN |
| Title: | Screw, injection nozzle holder |
| Car: | VW |
Criteria
| Length [mm]: | 101 mm |
| Outer Diameter [mm]: | 18 mm |
| Thread Length [mm]: | 22 mm |
| Spanner Size: | T30 |
| Bolt Head-/Nut Design: | Female Torx |
| Screw length below head [mm]: | 92 mm |
| Thread Size: | M6 x 1,0 |
| Guarantee: | 3 years guarantee |
| General Information: | These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions. |
Show all
Show less
General information
| Code: | FE180445 |
| Brand: | FEBI BILSTEIN |
| Title: | Timing Chain |
| Car: | ŠKODA-VW |
Criteria
| Chain Type: | Simplex |
| Timing Chain Size: | G68HRF-5 |
| Number of chain links: | 174 |
| Fitting Position: | Upper |
| Chain Type: | Closed chain |
| Chain pitch [mm]: | 9,525 mm |
| Observe service information: | yes |
| Guarantee: | 3 years guarantee |
| General Information: | These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions. |
Show all
Show less
General information
| Code: | FE181224 |
| Brand: | FEBI BILSTEIN |
| Title: | V-ribbed Belt |
Criteria
| Length [mm]: | 1120 mm |
| Material: | EPDM (ethylene propylene diene Monomer (M-class) rubber) |
| Number of ribs: | 4 |
| Guarantee: | 3 years guarantee |
| General Information: | These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions. |
Show all
Show less
General information
| Code: | FE183454 |
| Brand: | FEBI BILSTEIN |
| Title: | Water Pump, engine cooling |
| Car: | ŠKODA-VW |
Criteria
| Number of blades/vanes: | 5 |
| Supplementary Article/Supplementary Info 2: | with seal ring |
| Observe service information: | yes |
| Guarantee: | 3 years guarantee |
| General Information: | These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions. |
Show all
Show less
General information
| Code: | FE185841 |
| Brand: | FEBI BILSTEIN |
| Title: | V-ribbed Belt |
Criteria
| Length [mm]: | 922 mm |
| Material: | EPDM (ethylene propylene diene Monomer (M-class) rubber) |
| Fitting Position: | engine sided |
| Number of ribs: | 6 |
| Tensile Cord Material: | Aramid |
| Alternator Type: | for starter generator |
| Guarantee: | 3 years guarantee |
| General Information: | These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions. |
Show all
Show less
General information
| Code: | FE189477 |
| Brand: | FEBI BILSTEIN |
| Title: | Mounting Kit, charger |
| Car: | VW |
Criteria
| Guarantee: | 3 years guarantee |
| General Information: | These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions. |
General information
| Code: | FE29318 |
| Brand: | FEBI BILSTEIN |
| Title: | Sensor, coolant temperature |
| Car: | ŠKODA-VW |
Criteria
| Number of connectors: | 2 |
| Colour Coding: | grey |
| Screw length below head [mm]: | 20 mm |
| Supplementary Article/Supplementary Info: | with retaining spring |
| Supplementary Article/Supplementary Info: | with gasket/seal |
| Guarantee: | 3 years guarantee |
| General Information: | These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions. |
Show all
Show less