Search by vehicle
Search by KBA
Search by engine
FORD Y7JA
Choose your car manufacturer, model and engine type. This will allow our system to find parts for your vehicle.
FORD Y7JA
Choose a car by KBA.
FORD Y7JA
Choose an engine.
View search
Hide search
Spare parts FORD Y7JA
General information
| Code: | 7.06032.75.0 |
| Brand: | PIERBURG |
| Title: | High-pressure Pump |
Criteria
| Operating Mode: | mechanical |
| Article Number of recommended accessories: | 7.50086.04.0 |
| Supplementary Article/Supplementary Info 2: | with seal ring |
Show all
Show less
General information
| Code: | 7.50086.02.0 |
| Brand: | PIERBURG |
| Title: | Tappet, high-pressure pump |
Criteria
| Outer Diameter [mm]: | 26 mm |
| Height [mm]: | 28,4 mm |
General information
| Code: | 7.50086.04.0 |
| Brand: | PIERBURG |
| Title: | Tappet, high-pressure pump |
Criteria
| Outer Diameter [mm]: | 26 mm |
| Height [mm]: | 19 mm |
General information
| Code: | FE100320 |
| Brand: | FEBI BILSTEIN |
| Title: | Tensioner Pulley, timing belt |
| Car: | FORD |
Criteria
| Width [mm]: | 26 mm |
| Outer Diameter [mm]: | 60 mm |
| Observe service information: | yes |
| General Information: | These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions. |
Show all
Show less
General information
| Code: | FE104244 |
| Brand: | FEBI BILSTEIN |
| Title: | Camshaft Adjuster, VVT hub |
| Tag: | febi Plus |
| Car: | FORD |
Criteria
| Paired article number: | 104242 |
| Number of Teeth: | 38 |
| Fitting Position: | Intake Side |
| Supplementary Article/Supplementary Info 2: | without screw |
| General Information: | These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions. |
Show all
Show less
General information
| Code: | FE105933 |
| Brand: | FEBI BILSTEIN |
| Title: | Cap, coolant tank |
| Car: | FORD |
Criteria
| Material: | Plastic |
| Opening Pressure [bar]: | 1,45 bar |
| For OE number: | 1 301 104 |
| General Information: | These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions. |
Show all
Show less
General information
| Code: | FE106104 |
| Brand: | FEBI BILSTEIN |
| Title: | Thermostat, coolant |
| Car: | FORD |
Criteria
| Opening Temperature [°C]: | 92 °C |
| Outer Diameter [mm]: | 52 mm |
| Supplementary Article/Supplementary Info: | with gasket/seal |
| Observe service information: | yes |
| General Information: | These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions. |
Show all
Show less
General information
| Code: | FE173939 |
| Brand: | FEBI BILSTEIN |
| Title: | Thermostat, coolant |
| Car: | FORD |
Criteria
| Opening Temperature [°C]: | 50 °C |
| Supplementary Article/Supplementary Info 2: | with seal ring |
| General Information: | These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions. |
Show all
Show less
General information
| Code: | FE176125 |
| Brand: | FEBI BILSTEIN |
| Title: | Ignition Coil |
| Car: | FORD |
Criteria
| Number of connectors: | 3 |
| For OE number: | 1 827 901 |
| General Information: | These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions. |
Show all
Show less
General information
| Code: | FE178402 |
| Brand: | FEBI BILSTEIN |
| Title: | Deflection/Guide Pulley, V-ribbed belt |
| Car: | FORD |
Criteria
| Width of castor bearing surface [mm]: | 28 mm |
| Width [mm]: | 28 mm |
| Outer Diameter [mm]: | 72 mm |
| Mounting points diameter [mm]: | 17 mm |
| Material: | Plastic |
| General Information: | These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions. |
Show all
Show less