Search by vehicle
Search by KBA
Search by engine
MAZDA FP33
Choose your car manufacturer, model and engine type. This will allow our system to find parts for your vehicle.
MAZDA FP33
Choose a car by KBA.
MAZDA FP33
Choose an engine.
View search
Hide search
Spare parts MAZDA FP33
General information
| Code: | FE106963 |
| Brand: | FEBI BILSTEIN |
| Title: | Shaft Seal, crankshaft |
| Car: | MAZDA |
Criteria
| Width [mm]: | 6 mm |
| Inner Diameter [mm]: | 42,5 mm |
| Outer Diameter [mm]: | 54,5 mm |
| Rotation Direction: | Clockwise rotation |
| Material: | MVQ (silicone rubber) |
| Fitting Position: | frontal sided |
| Guarantee: | 3 years guarantee |
| General Information: | These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions. |
Show all
Show less
General information
| Code: | FE107707 |
| Brand: | FEBI BILSTEIN |
| Title: | Thermostat, coolant |
| Car: | MAZDA |
Criteria
| Opening Temperature [°C]: | 82 °C |
| Outer Diameter [mm]: | 52 mm |
| Supplementary Article/Supplementary Info 2: | with seal ring |
| Observe service information: | yes |
| Guarantee: | 3 years guarantee |
| General Information: | These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions. |
Show all
Show less
General information
| Code: | FE177368 |
| Brand: | FEBI BILSTEIN |
| Title: | Oxygen Sensor |
| Car: | MAZDA |
Criteria
| Oxygen Sensor: | Heated |
| Oxygen Sensor: | Regulating Sensor |
| External Thread Size: | M18 x 1,5 |
| Spanner Size: | 22 |
| Number of circuits: | 4 |
| Cable Length [mm]: | 330 mm |
| Guarantee: | 3 years guarantee |
| General Information: | These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions. |
Show all
Show less
General information
| Code: | FE180282 |
| Brand: | FEBI BILSTEIN |
| Title: | Screw Plug, oil sump |
| Car: | MAZDA |
Criteria
| Length [mm]: | 18 mm |
| External Thread Size: | M14 x 1,5 |
| Thread Length [mm]: | 10 mm |
| Spanner Size: | 19 |
| Bolt Head-/Nut Design: | External Hexagon |
| Material: | Steel |
| Surface: | Zinc-coated |
| Screw length below head [mm]: | 10 mm |
| Supplementary Article/Supplementary Info 2: | without seal ring |
| Guarantee: | 3 years guarantee |
| General Information: | These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions. |
Show all
Show less
General information
| Code: | FE192989 |
| Brand: | FEBI BILSTEIN |
| Title: | Alternator |
| Car: | MAZDA |
Criteria
| Voltage [V]: | 12 V |
| Current Strength [A]: | 80 A |
| Alternator Charging Current [A]: | 80 A |
| Belt Pulley Ø [mm]: | 54 mm |
| Pulleys: | with belt pulley |
| Number of ribs: | 4 |
| Guarantee: | 3 years guarantee |
| General Information: | These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions. |
Show all
Show less
General information
| Code: | FE193872 |
| Brand: | FEBI BILSTEIN |
| Title: | Oil Filter |
| Car: | HONDA |
Criteria
| Filter type: | Spin-on Filter |
| Height [mm]: | 67 mm |
| Outer Diameter [mm]: | 68 mm |
| Internal Thread Size: | M20 x 1,5 |
| Guarantee: | 3 years guarantee |
| General Information: | These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions. |
Show all
Show less
General information
| Code: | FE194288 |
| Brand: | FEBI BILSTEIN |
| Title: | Seal Ring, oil drain plug |
| Car: | HYUNDAI |
Criteria
| Inner Diameter [mm]: | 14,4 mm |
| Height [mm]: | 2 mm |
| Outer Diameter [mm]: | 22 mm |
| Material: | Aluminium |
| Guarantee: | 3 years guarantee |
| General Information: | These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions. |
Show all
Show less
General information
| Code: | FE197893 |
| Brand: | FEBI BILSTEIN |
| Title: | Screw Plug, oil sump |
| Car: | FORD |
Criteria
| Length [mm]: | 18 mm |
| External Thread Size: | M14 x 1,5 |
| Thread Length [mm]: | 10 mm |
| Quality/ Grade: | 6.8 |
| Spanner Size: | 19 |
| Bolt Head-/Nut Design: | External Hexagon |
| Material: | Steel |
| Surface: | Zinc-coated |
| Screw length below head [mm]: | 10 mm |
| Supplementary Article/Supplementary Info 2: | with seal ring |
| Guarantee: | 3 years guarantee |
| General Information: | These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions. |
Show all
Show less
General information
| Code: | FE198093 |
| Brand: | FEBI BILSTEIN |
| Title: | Seal Ring, oil drain plug |
| Car: | MAZDA |
Criteria
| Inner Diameter [mm]: | 12,4 mm |
| Outer Diameter [mm]: | 17,8 mm |
| Material: | Copper |
| Guarantee: | 3 years guarantee |
| General Information: | These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions. |
Show all
Show less

