Search by vehicle
Search by KBA
Search by engine
DAEWOO B12S3
Choose your car manufacturer, model and engine type. This will allow our system to find parts for your vehicle.
DAEWOO B12S3
Choose a car by KBA.
DAEWOO B12S3
Choose an engine.
View search
Hide search
Spare parts DAEWOO B12S3
General information
| Code: | FE01262 |
| Brand: | FEBI BILSTEIN |
| Title: | Water Pump, engine cooling |
| Car: | OPEL |
Criteria
| Housing material: | Cast Aluminium |
| Water pump impeller material: | Plastic |
| Seal Material: | Rubber |
| Number of Teeth: | 19 |
| Number of blades/vanes: | 12 |
| For OE number: | 13 34 065 |
| Supplementary Article/Supplementary Info 2: | with seal ring |
| Observe service information: | yes |
| General Information: | These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions. |
Show all
Show less
General information
| Code: | FE02998 |
| Brand: | FEBI BILSTEIN |
| Title: | Tappet |
| Car: | OPEL |
Criteria
| Thickness [mm]: | 68 mm |
| Outer Diameter [mm]: | 21,5 mm |
| Operating Mode: | hydraulic |
| Fitting Position: | Intake Side |
| Fitting Position: | Exhaust Side |
| Observe service information: | yes |
| General Information: | These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions. |
Show all
Show less
General information
| Code: | FE179558 |
| Brand: | FEBI BILSTEIN |
| Title: | Oxygen Sensor |
| Car: | CHEVROLET |
Criteria
| Oxygen Sensor: | Heated |
| External Thread Size: | M18 x 1,5 |
| Number of connectors: | 4 |
| Cable Length [mm]: | 400 mm |
| For OE number: | 96291099 |
| General Information: | These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions. |
Show all
Show less
General information
| Code: | FE184462 |
| Brand: | FEBI BILSTEIN |
| Title: | Fuel Filter |
| Car: | CHEVROLET |
Criteria
| Filter type: | In-Line Filter |
| Length [mm]: | 146 mm |
| Outer Diameter [mm]: | 55 mm |
| Pipe Diameter [mm]: | 8 mm |
| General Information: | These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions. |
Show all
Show less
General information
| Code: | FE26306 |
| Brand: | FEBI BILSTEIN |
| Title: | Water Pump, engine cooling |
| Car: | CHEVROLET |
Criteria
| Housing material: | Cast Aluminium |
| Water pump impeller material: | Metal |
| Seal Material: | Paper |
| Number of Teeth: | 22 |
| Number of blades/vanes: | 7 |
| Supplementary Article/Supplementary Info: | with gasket/seal |
| Observe service information: | yes |
| General Information: | These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions. |
Show all
Show less
General information
| Code: | FE26850 |
| Brand: | FEBI BILSTEIN |
| Title: | Timing Belt |
| Car: | MITSUBISHI |
Criteria
| Width [mm]: | 25 mm |
| Number of Teeth: | 109 |
| Belts: | with rounded tooth profile |
| Observe service information: | yes |
| General Information: | These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions. |
Show all
Show less
General information
| Code: | FE29311 |
| Brand: | FEBI BILSTEIN |
| Title: | Tensioner Pulley, timing belt |
| Car: | CHEVROLET |
Criteria
| Width [mm]: | 28 mm |
| Outer Diameter [mm]: | 42 mm |
| General Information: | These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions. |
Show all
Show less
General information
| Code: | FE31999 |
| Brand: | FEBI BILSTEIN |
| Title: | Ignition Coil |
| Car: | CHEVROLET |
Criteria
| Ignition Coil: | 4 Spark |
| Number of connectors: | 3 |
| Colour: | black |
| General Information: | These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions. |
Show all
Show less
General information
| Code: | FE32396 |
| Brand: | FEBI BILSTEIN |
| Title: | Timing Belt Kit |
| Car: | CHEVROLET |
Criteria
| Width [mm]: | 25 mm |
| Number of Teeth: | 109 |
| Observe service information: | yes |
| General Information: | These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions. |
Show all
Show less
General information
| Code: | FE33123 |
| Brand: | FEBI BILSTEIN |
| Title: | Sensor, crankshaft pulse |
| Car: | CHEVROLET |
Criteria
| Length [mm]: | 280 mm |
| Number of connectors: | 3 |
| Cable Length [mm]: | 285 mm |
| Supplementary Article/Supplementary Info 2: | with seal ring |
| General Information: | These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions. |
Show all
Show less