Search by vehicle
Search by KBA
Search by engine
MAZDA HFY1
Choose your car manufacturer, model and engine type. This will allow our system to find parts for your vehicle.
MAZDA HFY1
Choose a car by KBA.
MAZDA HFY1
Choose an engine.
View search
Hide search
Spare parts MAZDA HFY1
General information
| Code: | 7.10102.20.0 |
| Brand: | PIERBURG |
| Title: | Auxiliary Water Pump (cooling water circuit) |
Criteria
| Operating Mode: | Electric |
| Voltage [V]: | 12 V |
| For OE number: | HF07-15710A |
| Diameter 1 [mm]: | 20 mm |
| Diameter 2 [mm]: | 20 mm |
Show all
Show less
General information
| Code: | FE14098 |
| Brand: | FEBI BILSTEIN |
| Title: | Pilot Bearing, clutch |
| Car: | ŠKODA-VW |
Criteria
| Width [mm]: | 15 mm |
| Inner Diameter [mm]: | 15,4 mm |
| Outer Diameter [mm]: | 21 mm |
| Bearing Type: | Needle Bearing |
| General Information: | These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions. |
Show all
Show less
General information
| Code: | FE177117 |
| Brand: | FEBI BILSTEIN |
| Title: | Sensor, crankshaft pulse |
| Car: | MAZDA |
Criteria
| Number of connectors: | 3 |
| General Information: | These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions. |
General information
| Code: | FE183364 |
| Brand: | FEBI BILSTEIN |
| Title: | Belt Tensioner, V-ribbed belt |
| Car: | MAZDA |
Criteria
| Width of castor bearing surface [mm]: | 21 mm |
| Outer Diameter [mm]: | 65 mm |
| Material: | Metal |
| Operating Mode: | Automatic |
| General Information: | These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions. |
Show all
Show less
General information
| Code: | FE184930 |
| Brand: | FEBI BILSTEIN |
| Title: | V-ribbed Belt |
Criteria
| Length [mm]: | 987 mm |
| Material: | EPDM (ethylene propylene diene Monomer (M-class) rubber) |
| Number of ribs: | 6 |
| Tensile Cord Material: | Aramid |
| Alternator Type: | for starter generator |
| General Information: | These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions. |
Show all
Show less
General information
| Code: | FE184944 |
| Brand: | FEBI BILSTEIN |
| Title: | V-ribbed Belt |
Criteria
| Length [mm]: | 994 mm |
| Material: | EPDM (ethylene propylene diene Monomer (M-class) rubber) |
| Number of ribs: | 6 |
| Tensile Cord Material: | Aramid |
| Alternator Type: | for starter generator |
| General Information: | These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions. |
Show all
Show less
General information
| Code: | FE186090 |
| Brand: | FEBI BILSTEIN |
| Title: | Timing Chain |
Criteria
| Chain Type: | Simplex |
| Timing Chain Size: | G53RING-1 |
| Number of chain links: | 150 |
| Chain Type: | Closed chain |
| Chain pitch [mm]: | 8 mm |
| Observe service information: | yes |
| General Information: | These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions. |
Show all
Show less
General information
| Code: | FE193872 |
| Brand: | FEBI BILSTEIN |
| Title: | Oil Filter |
| Car: | HONDA |
Criteria
| Filter type: | Spin-on Filter |
| Height [mm]: | 67 mm |
| Outer Diameter [mm]: | 68 mm |
| Internal Thread Size: | M20 x 1,5 |
| General Information: | These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions. |
Show all
Show less
General information
| Code: | FE193882 |
| Brand: | FEBI BILSTEIN |
| Title: | Screw Plug, oil sump |
| Car: | KIA |
Criteria
| Length [mm]: | 27 mm |
| Outer Diameter [mm]: | 23 mm |
| External Thread Size: | M14 x 1,5 |
| Thread Length [mm]: | 17 mm |
| Spanner Size: | 17 |
| Bolt Head-/Nut Design: | External Hexagon |
| Material: | Steel |
| Surface: | Zink flake coated |
| Screw length below head [mm]: | 17 mm |
| Supplementary Article/Supplementary Info 2: | without seal ring |
| General Information: | These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions. |
Show all
Show less
General information
| Code: | FE194318 |
| Brand: | FEBI BILSTEIN |
| Title: | Screw Plug, oil sump |
| Car: | KIA |
Criteria
| Length [mm]: | 27 mm |
| Outer Diameter [mm]: | 23 mm |
| External Thread Size: | M14 x 1,5 |
| Thread Length [mm]: | 17 mm |
| Spanner Size: | 17 |
| Bolt Head-/Nut Design: | External Hexagon |
| Material: | Steel |
| Surface: | Zink flake coated |
| Screw length below head [mm]: | 17 mm |
| Supplementary Article/Supplementary Info 2: | without seal ring |
| General Information: | These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions. |
Show all
Show less