Search by vehicle
Search by KBA
Search by engine
NISSAN PR25DD
Choose your car manufacturer, model and engine type. This will allow our system to find parts for your vehicle.
NISSAN PR25DD
Choose a car by KBA.
NISSAN PR25DD
Choose an engine.
View search
Hide search
Spare parts NISSAN PR25DD
General information
| Code: | FE107807 |
| Brand: | FEBI BILSTEIN |
| Title: | Water Pump, engine cooling |
| Car: | NISSAN |
Criteria
| Housing material: | Cast Aluminium |
| Water pump impeller material: | Metal |
| Seal Material: | Metal |
| Number of blades/vanes: | 6 |
| Supplementary Article/Supplementary Info: | with gasket/seal |
| Observe service information: | yes |
| Guarantee: | 3 years guarantee |
| General Information: | These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions. |
Show all
Show less
General information
| Code: | FE22085 |
| Brand: | FEBI BILSTEIN |
| Title: | Cap, coolant tank |
| Car: | NISSAN |
Criteria
| Colour: | black |
| Material: | Plastic |
| Opening Pressure [bar]: | 1,4 bar |
| For OE number: | 21516-00QAA |
| Guarantee: | 3 years guarantee |
| General Information: | These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions. |
Show all
Show less
General information
| Code: | FE30262 |
| Brand: | FEBI BILSTEIN |
| Title: | Screw Plug, oil sump |
| Car: | TOYOTA |
Criteria
| Length [mm]: | 21 mm |
| Outer Diameter [mm]: | 22 mm |
| External Thread Size: | M12 x 1,25 |
| Thread Length [mm]: | 11 mm |
| Quality/ Grade: | 8.8 |
| Spanner Size: | 14 |
| Bolt Head-/Nut Design: | External Hexagon |
| Colour: | silver |
| Material: | Steel |
| Surface: | Zinc-coated |
| Screw length below head [mm]: | 11 mm |
| Supplementary Article/Supplementary Info 2: | without seal ring |
| Guarantee: | 3 years guarantee |
| General Information: | These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions. |
Show all
Show less
General information
| Code: | FE32099 |
| Brand: | FEBI BILSTEIN |
| Title: | Oil Filter |
| Car: | MAZDA |
Criteria
| Filter type: | Spin-on Filter |
| Height [mm]: | 72 mm |
| Outer Diameter [mm]: | 66 mm |
| Internal Thread Size: | M20 x 1,5 |
| Guarantee: | 3 years guarantee |
| General Information: | These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions. |
Show all
Show less
General information
| Code: | FE48878 |
| Brand: | FEBI BILSTEIN |
| Title: | Screw Plug, oil sump |
| Car: | TOYOTA |
Criteria
| Length [mm]: | 21 mm |
| Outer Diameter [mm]: | 22 mm |
| External Thread Size: | M12 x 1,25 |
| Thread Length [mm]: | 11 mm |
| Quality/ Grade: | 8.8 |
| Spanner Size: | 14 |
| Bolt Head-/Nut Design: | External Hexagon |
| Colour: | silver |
| Material: | Steel |
| Surface: | Zinc-coated |
| Screw length below head [mm]: | 11 mm |
| Supplementary Article/Supplementary Info 2: | without seal ring |
| Guarantee: | 3 years guarantee |
| General Information: | These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions. |
Show all
Show less
General information
| Code: | 7.50086.02.0 |
| Brand: | PIERBURG |
| Title: | Tappet, high-pressure pump |
Criteria
| Outer Diameter [mm]: | 26 mm |
| Height [mm]: | 28,4 mm |
General information
| Code: | 70-31414-10 |
| Brand: | VICTOR REINZ |
| Title: | Gasket, intake manifold |
| Tag: | REINZOSIL |
| Car: | TRUCK/BUS |
Criteria
| Material: | Silicone |
| Chemical Properties: | not solvent-bearing |
| Chemical Properties: | Permanently elastic |
| Chemical Properties: | hardening |
| Colour: | anthracite |
| Capacity [ml]: | 70 ml |
| Temperature range from [°C]: | 50 °C |
| Temperature range to [°C]: | 320 °C |
| Container Type: | Tube |
| Only in connection with: | 70-31415-00 |
Show all
Show less
General information
| Code: | FE173367 |
| Brand: | FEBI BILSTEIN |
| Title: | Mounting, engine |
| Car: | RENAULT |
Criteria
| Fitting Position: | Rear |
| Mounting Type: | Rubber-Metal Mount |
| For OE number: | 11 36 06L A0A |
| Observe service information: | yes |
| Guarantee: | 3 years guarantee |
| General Information: | These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions. |
Show all
Show less
General information
| Code: | FE30264 |
| Brand: | FEBI BILSTEIN |
| Title: | Screw Plug, oil sump |
| Car: | TOYOTA |
Criteria
| Length [mm]: | 21 mm |
| Outer Diameter [mm]: | 22 mm |
| External Thread Size: | M12 x 1,25 |
| Thread Length [mm]: | 9 mm |
| Spanner Size: | 14 |
| Bolt Head-/Nut Design: | External Hexagon |
| Material: | Steel |
| Surface: | Zinc-coated |
| Screw length below head [mm]: | 11 mm |
| Supplementary Article/Supplementary Info 2: | with seal ring |
| Guarantee: | 3 years guarantee |
| General Information: | These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions. |
Show all
Show less
General information
| Code: | 15045100 |
| Brand: | AJUSA |
| Title: | Shaft Seal, crankshaft |
| Car: | NISSAN |
Criteria
| Inner Diameter [mm]: | 46 mm |
| Outer Diameter [mm]: | 58 mm |
| Height [mm]: | 7 mm |
Show all
Show less