Search by vehicle
Search by KBA
Search by engine
FORD UADA
Choose your car manufacturer, model and engine type. This will allow our system to find parts for your vehicle.
FORD UADA
Choose a car by KBA.
FORD UADA
Choose an engine.
View search
Hide search
Spare parts FORD UADA
General information
| Code: | 7.22184.25.0 |
| Brand: | PIERBURG |
| Title: | Mass Air Flow Sensor |
| Car: | FORD |
Criteria
| Operating Mode: | Electric |
| Voltage [V]: | 12 V |
Netto price:
USD $101.57
(USD $101.57 without VAT 0%)
Your price:
-40%
USD $60.94
(USD $60.94 without VAT 0%)
| Warehouse: | 6 pcs | |
| Supplier: | > 25 pcs |
General information
| Code: | 026.680 |
| Brand: | ELRING |
| Title: | Seal Ring, valve stem |
| Car: | FORD |
Criteria
| Valve Stem Diameter [mm]: | 5,5 mm |
| Inner Diameter [mm]: | 10,8 mm |
| Outer Diameter [mm]: | 25 mm |
| Height [mm]: | 18 mm |
| Material: | FPM (fluoride rubber) |
| Colour: | green |
| Goods tariff number: | 8484200000 |
Show all
Show less
Netto price:
USD $1.67
(USD $1.67 without VAT 0%)
Your price:
-25%
USD $1.25
(USD $1.25 without VAT 0%)
| Warehouse: | > 25 pcs |
General information
| Code: | 036.164 |
| Brand: | ELRING |
| Title: | Sealing compound - Dirko - Grey, 70ml |
| Tag: | Dirko HT |
| Car: | ŠKODA-VW |
Criteria
| Chemical Properties: | Permanently elastic |
| Chemical Properties: | not solvent-bearing |
| Chemical Properties: | UV resistant |
| Container Type: | Tube |
| Capacity [ml]: | 70 ml |
| Material: | Silicone |
| Temperature range from [°C]: | -60 °C |
| Temperature range to [°C]: | 315 °C |
Show all
Show less
Netto price:
USD $6.00
(USD $6.00 without VAT 0%)
Your price:
-25%
USD $4.50
(USD $4.50 without VAT 0%)
| Warehouse: | > 25 pcs |
General information
| Code: | 7.03335.55.0 |
| Brand: | PIERBURG |
| Title: | Water Pump, engine cooling |
| Car: | FORD |
Criteria
| Operating Mode: | Electric |
| Voltage [V]: | 12,5 V |
| Diameter 1 [mm]: | 40,25 mm |
| Diameter 2 [mm]: | 40,25 mm |
| Water pump impeller material: | Plastic |
| Signal type: | PWM |
| Supplementary Article/Supplementary Info: | with vibration dampers |
Show all
Show less
General information
| Code: | FE103079 |
| Brand: | FEBI BILSTEIN |
| Title: | Tensioner Pulley, timing belt |
| Car: | PEUGEOT |
Criteria
| Width of castor bearing surface [mm]: | 30 mm |
| Outer Diameter [mm]: | 60 mm |
| Observe service information: | yes |
| Guarantee: | 3 years guarantee |
| General Information: | These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions. |
Show all
Show less
General information
| Code: | FE103684 |
| Brand: | FEBI BILSTEIN |
| Title: | Shaft Seal, crankshaft |
| Car: | FORD |
Criteria
| Width [mm]: | 15 mm |
| Inner Diameter [mm]: | 88 mm |
| Outer Diameter [mm]: | 180 mm |
| Fitting Position: | transmission sided |
| Supplementary Article/Supplementary Info 2: | with flange |
| Guarantee: | 3 years guarantee |
| General Information: | These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions. |
Show all
Show less
General information
| Code: | FE105909 |
| Brand: | FEBI BILSTEIN |
| Title: | Mass Air Flow Sensor |
| Car: | FORD |
Criteria
| Resistor Type: | Hot-film Sensor |
| Number of connectors: | 4 |
| Housing Type: | without housing |
| For OE number: | 1 480 570 |
| Guarantee: | 3 years guarantee |
| General Information: | These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions. |
Show all
Show less
General information
| Code: | FE105933 |
| Brand: | FEBI BILSTEIN |
| Title: | Cap, coolant tank |
| Car: | FORD |
Criteria
| Material: | Plastic |
| Opening Pressure [bar]: | 1,45 bar |
| For OE number: | 1 301 104 |
| Guarantee: | 3 years guarantee |
| General Information: | These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions. |
Show all
Show less
General information
| Code: | FE106482 |
| Brand: | FEBI BILSTEIN |
| Title: | Sensor, coolant temperature |
| Car: | FORD |
Criteria
| Number of connectors: | 2 |
| Colour: | grey |
| Connector Shape: | rectangular |
| Supplementary Article/Supplementary Info 2: | with seal ring |
| For OE number: | 1 802 332 |
| Guarantee: | 3 years guarantee |
| General Information: | These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions. |
Show all
Show less
General information
| Code: | FE107668 |
| Brand: | FEBI BILSTEIN |
| Title: | Shaft Seal, crankshaft |
| Car: | MAZDA |
Criteria
| Width [mm]: | 6 mm |
| Inner Diameter [mm]: | 37 mm |
| Outer Diameter [mm]: | 50 mm |
| Rotation Direction: | Clockwise rotation |
| Material: | MVQ (silicone rubber) |
| Fitting Position: | frontal sided |
| Guarantee: | 3 years guarantee |
| General Information: | These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions. |
Show all
Show less