Search by vehicle
Search by KBA
Search by engine
MG 10E4E
Choose your car manufacturer, model and engine type. This will allow our system to find parts for your vehicle.
MG 10E4E
Choose a car by KBA.
MG 10E4E
Choose an engine.
View search
Hide search
Spare parts MG 10E4E
General information
| Code: | VT0047 |
| Brand: | ET ENGINETEAM |
| Title: | Camshaft Adjuster, VVT hub |
| Car: | Opel MG ZS SUV Mokka Karl Insignia Corsa Astra Adam 1,0/1,4 B 10 XE 2014+ |
Criteria
| Fitting Position: | Intake Side |
| Fitting Position: | Exhaust Side |
| Supplementary Article/Supplementary Info 2: | with screw |
| Number of Teeth: | 54 |
Show all
Show less
Netto price:
USD $130.95
(USD $130.95 without VAT 0%)
Your price:
-40%
USD $78.57
(USD $78.57 without VAT 0%)
| Warehouse: | 22 pcs |
General information
| Code: | VT0047VR1 |
| Brand: | ET ENGINETEAM |
| Title: | Camshaft Adjuster, VVT hub |
| Tag: | boxET – service kit |
| Car: | Opel MG ZS SUV Mokka Karl Insignia Corsa Astra Adam 1,0/1,4 B 10 XE 2014+ |
Criteria
| Fitting Position: | Intake Side |
| Fitting Position: | Exhaust Side |
| Number of Teeth: | 54 |
Show all
Show less
Netto price:
USD $253.00
(USD $253.00 without VAT 0%)
Your price:
-40%
USD $151.80
(USD $151.80 without VAT 0%)
| Warehouse: | 11 pcs |
General information
| Code: | 036.164 |
| Brand: | ELRING |
| Title: | Sealing compound - Dirko - Grey, 70ml |
| Tag: | Dirko HT |
| Car: | ŠKODA-VW |
Criteria
| Chemical Properties: | Permanently elastic |
| Chemical Properties: | not solvent-bearing |
| Chemical Properties: | UV resistant |
| Container Type: | Tube |
| Capacity [ml]: | 70 ml |
| Material: | Silicone |
| Temperature range from [°C]: | -60 °C |
| Temperature range to [°C]: | 315 °C |
Show all
Show less
Netto price:
USD $6.00
(USD $6.00 without VAT 0%)
Your price:
-25%
USD $4.50
(USD $4.50 without VAT 0%)
| Warehouse: | > 25 pcs |
General information
| Code: | G11479 |
| Brand: | FRECCIA |
| Title: | Valve Guide |
| Car: | OPEL |
Criteria
| Valve Type: | for inlet valves |
| Valve Type: | for exhaust valves |
| Length [mm]: | 37 mm |
| Outer Diameter [mm]: | 10,03 mm |
| Inner Diameter [mm]: | 5 mm |
| Material: | Grey Cast Iron |
Show all
Show less
Netto price:
USD $2.48
(USD $2.48 without VAT 0%)
Your price:
-30%
USD $1.74
(USD $1.74 without VAT 0%)
price per 1 pcs
| Warehouse: | 4 pcs | |
| Supplier: | > 25 pcs |
Packs of 16 pcs · opened pack in stock
General information
| Code: | FE106728 |
| Brand: | FEBI BILSTEIN |
| Title: | Timing Chain Kit |
| Tag: | Basic Short Kit |
| Car: | OPEL |
Criteria
| Chain Type: | Silent Chain |
| Number of chain links: | 178 |
| Chain Type: | with chain lock |
| Observe service information: | yes |
| Guarantee: | 3 years guarantee |
| Technical Information: | Please refer to the photo and contents list to accurately identify the items included with delivery. Check the sprockets for wear and replace if necessary. |
| General Information: | These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions. |
Show all
Show less
General information
| Code: | FE109201 |
| Brand: | FEBI BILSTEIN |
| Title: | Oil Filter |
| Car: | CHRYSLER |
Criteria
| Filter type: | Spin-on Filter |
| Housing material: | Sheet Steel |
| Height [mm]: | 86 mm |
| Outer Diameter [mm]: | 74 mm |
| Internal Thread Size: | M22 x 1,5 |
| Seal Ring Diameter [mm]: | 71 mm |
| Guarantee: | 3 years guarantee |
| General Information: | These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions. |
Show all
Show less
General information
| Code: | FE180148 |
| Brand: | FEBI BILSTEIN |
| Title: | Shaft Seal, crankshaft |
| Car: | OPEL |
Criteria
| Inner Diameter [mm]: | 44 mm |
| Height [mm]: | 8,5 mm |
| Outer Diameter [mm]: | 60 mm |
| Material: | FPM (fluoride rubber) |
| Supplementary Article/Supplementary Info 2: | with mounting sleeve |
| Fitting Position: | frontal sided |
| Guarantee: | 3 years guarantee |
| General Information: | These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions. |
Show all
Show less
General information
| Code: | FE188325 |
| Brand: | FEBI BILSTEIN |
| Title: | Belt Tensioner, V-ribbed belt |
| Car: | OPEL |
Criteria
| Width of castor bearing surface [mm]: | 25 mm |
| Outer Diameter [mm]: | 70 mm |
| Material: | Metal |
| Operating Mode: | Automatic |
| Guarantee: | 3 years guarantee |
| General Information: | These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions. |
Show all
Show less
General information
| Code: | R6990/SNT |
| Brand: | FRECCIA |
| Title: | Intake Valve |
| Car: | OPEL |
Criteria
| Supplementary Article/Supplementary Info 2: | Nitrided valve stem |
| Length [mm]: | 106,4 mm |
| Valve Stem Diameter [mm]: | 5 mm |
| Valve Head Diameter [mm]: | 28 mm |
| Material: | Chrome-silicon-steel |
| Valve seat angle [°]: | 45 ° |
| Connector type: | I |
Show all
Show less
General information
| Code: | R6991/RNT |
| Brand: | FRECCIA |
| Title: | Exhaust Valve |
| Car: | OPEL |
Criteria
| Supplementary Article/Supplementary Info 2: | Nitrided valve stem |
| Length [mm]: | 105,6 mm |
| Valve Stem Diameter [mm]: | 5 mm |
| Valve Head Diameter [mm]: | 23,3 mm |
| Material: | Chrome-silicon-steel |
| Valve seat angle [°]: | 45 ° |
| Connector type: | I |
Show all
Show less