Search by vehicle
Search by KBA
Search by engine
CHEVROLET LX5(85CUL4)
Choose your car manufacturer, model and engine type. This will allow our system to find parts for your vehicle.
CHEVROLET LX5(85CUL4)
Choose a car by KBA.
CHEVROLET LX5(85CUL4)
Choose an engine.
View search
Hide search
Spare parts CHEVROLET LX5(85CUL4)
General information
| Code: | 036.164 |
| Brand: | ELRING |
| Title: | Sealing compound - Dirko - Grey, 70ml |
| Tag: | Dirko HT |
| Car: | ŠKODA-VW |
Criteria
| Chemical Properties: | Permanently elastic |
| Chemical Properties: | not solvent-bearing |
| Chemical Properties: | UV resistant |
| Container Type: | Tube |
| Capacity [ml]: | 70 ml |
| Material: | Silicone |
| Temperature range from [°C]: | -60 °C |
| Temperature range to [°C]: | 315 °C |
Show all
Show less
Netto price:
USD $6.00
(USD $6.00 without VAT 0%)
Your price:
-25%
USD $4.50
(USD $4.50 without VAT 0%)
| Warehouse: | > 25 pcs |
General information
| Code: | 590.797 |
| Brand: | ELRING |
| Title: | Shaft Seal, crankshaft |
| Car: | OPEL |
Criteria
| Inner Diameter [mm]: | 80 mm |
| Outer Diameter [mm]: | 98 mm |
| Height [mm]: | 10 mm |
| Radial Shaft Seal Design: | A/BS |
| Swirl Type: | Left-hand Twist |
| Material: | FPM (fluoride rubber) |
| Dust Cover: | with dust lip |
| Goods tariff number: | 8484200000 |
Show all
Show less
Netto price:
USD $5.33
(USD $5.33 without VAT 0%)
Your price:
-25%
USD $4.00
(USD $4.00 without VAT 0%)
| Warehouse: | 1 pcs |
General information
| Code: | 50013100 |
| Brand: | KOLBENSCHMIDT |
| Title: | Oil Filter |
| Car: | OPEL |
Criteria
| Filter type: | Spin-on Filter |
| Outer Diameter 1 [mm]: | 76 mm |
| Inner Diameter 1 [mm]: | 62 mm |
| Outer Diameter 2 [mm]: | 72 mm |
| Thread Size: | M18 x 1,5 |
| Height [mm]: | 91 mm |
Show all
Show less
General information
| Code: | 50013917 |
| Brand: | KOLBENSCHMIDT |
| Title: | Oil Filter |
| Car: | OPEL |
Criteria
| Filter type: | Spin-on Filter |
| Outer Diameter 1 [mm]: | 76 mm |
| Inner Diameter 1 [mm]: | 62 mm |
| Thread Size: | M18 x 1,5 |
| Height [mm]: | 79 mm |
Show all
Show less
General information
| Code: | 50014944 |
| Brand: | KOLBENSCHMIDT |
| Title: | Air Filter |
| Car: | CHEVROLET |
Criteria
| Length [mm]: | 221 mm |
| Width [mm]: | 185 mm |
| Height [mm]: | 45 mm |
| Filter type: | Filter Insert |
Show all
Show less
General information
| Code: | FE01262 |
| Brand: | FEBI BILSTEIN |
| Title: | Water Pump, engine cooling |
| Car: | OPEL |
Criteria
| Housing material: | Cast Aluminium |
| Water pump impeller material: | Plastic |
| Seal Material: | Rubber |
| Number of Teeth: | 19 |
| Number of blades/vanes: | 12 |
| Supplementary Article/Supplementary Info 2: | with seal ring |
| For OE number: | 13 34 065 |
| Observe service information: | yes |
| Guarantee: | 3 years guarantee |
| General Information: | These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions. |
Show all
Show less
General information
| Code: | FE02998 |
| Brand: | FEBI BILSTEIN |
| Title: | Tappet |
| Car: | OPEL |
Criteria
| Thickness [mm]: | 68 mm |
| Outer Diameter [mm]: | 21,5 mm |
| Operating Mode: | hydraulic |
| Fitting Position: | Intake Side |
| Fitting Position: | Exhaust Side |
| Observe service information: | yes |
| Guarantee: | 3 years guarantee |
| General Information: | These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions. |
Show all
Show less
General information
| Code: | FE06971 |
| Brand: | FEBI BILSTEIN |
| Title: | Tensioner Pulley, timing belt |
| Car: | OPEL |
Criteria
| Width of castor bearing surface [mm]: | 19 mm |
| Width [mm]: | 30,6 mm |
| Outer Diameter [mm]: | 59 mm |
| Guarantee: | 3 years guarantee |
| General Information: | These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions. |
Show all
Show less
General information
| Code: | FE10794 |
| Brand: | FEBI BILSTEIN |
| Title: | Cylinder Head Bolt |
| Car: | OPEL |
Criteria
| New version: | yes |
| Length [mm]: | 153 mm |
| External Thread Size: | M10 x 1,25 |
| Thread Length [mm]: | 61 mm |
| Quality/ Grade: | 10.9 |
| Spanner Size: | E12 |
| Bolt Head-/Nut Design: | Male Torx |
| Screw length below head [mm]: | 140 mm |
| Number of bolts/screws: | 10 |
| Guarantee: | 3 years guarantee |
| General Information: | These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions. |
Show all
Show less
General information
| Code: | FE14114 |
| Brand: | FEBI BILSTEIN |
| Title: | Timing Belt |
| Car: | OPEL |
Criteria
| Width [mm]: | 17 mm |
| Number of Teeth: | 111 |
| Belts: | with rounded tooth profile |
| Observe service information: | yes |
| Guarantee: | 3 years guarantee |
| General Information: | These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions. |
Show all
Show less