Search by vehicle
Search by KBA
Search by engine
CHEVROLET LH7(98CUL4)
Choose your car manufacturer, model and engine type. This will allow our system to find parts for your vehicle.
CHEVROLET LH7(98CUL4)
Choose a car by KBA.
CHEVROLET LH7(98CUL4)
Choose an engine.
View search
Hide search
Spare parts CHEVROLET LH7(98CUL4)
General information
| Code: | 036.164 |
| Brand: | ELRING |
| Title: | Sealing compound - Dirko - Grey, 70ml |
| Tag: | Dirko HT |
| Car: | ŠKODA-VW |
Criteria
| Chemical Properties: | Permanently elastic |
| Chemical Properties: | not solvent-bearing |
| Chemical Properties: | UV resistant |
| Container Type: | Tube |
| Capacity [ml]: | 70 ml |
| Material: | Silicone |
| Temperature range from [°C]: | -60 °C |
| Temperature range to [°C]: | 315 °C |
Show all
Show less
Netto price:
USD $6.00
(USD $6.00 without VAT 0%)
Your price:
-25%
USD $4.50
(USD $4.50 without VAT 0%)
| Warehouse: | > 25 pcs |
Netto price:
USD $1.33
(USD $1.33 without VAT 0%)
Your price:
-25%
USD $1.00
(USD $1.00 without VAT 0%)
| Warehouse: | > 25 pcs |
General information
| Code: | FE108039 |
| Brand: | FEBI BILSTEIN |
| Title: | Chain Kit, oil pump drive |
| Tag: | Basic Short Kit |
| Car: | OPEL |
Criteria
| Chain Type: | Simplex |
| Timing Chain Size: | G53HP |
| Timing Chain Size: | G53HR |
| Number of chain links: | 64 |
| Chain Type: | Closed chain |
| Chain pitch [mm]: | 8 mm |
| Supplementary Article/Supplementary Info 2: | Requires special tools for mounting |
| Guarantee: | 3 years guarantee |
| General Information: | These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions. |
Show all
Show less
General information
| Code: | FE173867 |
| Brand: | FEBI BILSTEIN |
| Title: | Fuel Filter |
| Car: | OPEL |
Criteria
| Filter type: | Filter Insert |
| Inner Diameter [mm]: | 17 mm |
| Height [mm]: | 115 mm |
| Outer Diameter [mm]: | 94 mm |
| Gasket inside diameter [mm]: | 98 mm |
| Gasket outside diameter [mm]: | 107,2 mm |
| Supplementary Article/Supplementary Info: | with gaskets/seals |
| Guarantee: | 3 years guarantee |
| General Information: | These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions. |
Show all
Show less
General information
| Code: | FE176254 |
| Brand: | FEBI BILSTEIN |
| Title: | Screw Plug, oil sump |
| Car: | OPEL |
Criteria
| Length [mm]: | 29 mm |
| Outer Diameter [mm]: | 26 mm |
| External Thread Size: | M12 x 1,75 |
| Thread Length [mm]: | 18 mm |
| Quality/ Grade: | 5.8 |
| Spanner Size: | T45 |
| Bolt Head-/Nut Design: | Female Torx |
| Material: | Steel |
| Surface: | Zinc-coated |
| Screw length below head [mm]: | 18 mm |
| Supplementary Article/Supplementary Info 2: | with seal ring |
| Guarantee: | 3 years guarantee |
| General Information: | These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions. |
Show all
Show less
General information
| Code: | FE181945 |
| Brand: | FEBI BILSTEIN |
| Title: | Seal, timing chain tensioner |
| Car: | OPEL |
Criteria
| Thickness [mm]: | 0,4 mm |
| Material: | NBR (nitrile butadiene rubber) |
| Material: | Steel |
| Observe service information: | yes |
| Guarantee: | 3 years guarantee |
| General Information: | These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions. |
Show all
Show less
General information
| Code: | FE188739 |
| Brand: | FEBI BILSTEIN |
| Title: | Shaft Seal, crankshaft |
| Car: | OPEL |
Criteria
| Width [mm]: | 110 mm |
| Inner Diameter [mm]: | 91,5 mm |
| Outer Diameter [mm]: | 109,3 mm |
| Material: | FKM (fluorocarbon rubber) |
| Supplementary Article/Supplementary Info 2: | with mounting sleeve |
| Fitting Position: | transmission sided |
| Guarantee: | 3 years guarantee |
| General Information: | These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions. |
Show all
Show less
General information
| Code: | 7.05466.04.0 |
| Brand: | PIERBURG |
| Title: | Water Pump, engine cooling |
| Car: | OPEL |
Criteria
| Operating Mode: | electromagnetic |
| Water pump clutch diameter [mm]: | 106,1 mm |
| Supplementary Article/Supplementary Info: | with gasket/seal |
| Supplementary Article/Supplementary Info: | with base carriers |
| Supplementary Article/Supplementary Info 2: | with thermostat |
| Supplementary Article/Supplementary Info 2: | with coolant regulator |
| Supplementary Article/Supplementary Info 2: | switchable water pump |
Show all
Show less

