Search by vehicle
Search by KBA
Search by engine
CHEVROLET LT4(376CUV8)
Choose your car manufacturer, model and engine type. This will allow our system to find parts for your vehicle.
CHEVROLET LT4(376CUV8)
Choose a car by KBA.
CHEVROLET LT4(376CUV8)
Choose an engine.
View search
Hide search
Spare parts CHEVROLET LT4(376CUV8)
General information
| Code: | 893.889 |
| Brand: | ELRING |
| Title: | Seal Ring, injector |
| Car: | Alpina Audi BMW Chevrolet Chrysler Citroën Cupra Daewoo DS Fiat Ford Jeep Land Rover Lotus Mazda Mercedes-Benz Mini Mitsubishi Nissan Opel Peugeot Porsche Puch Renault Rolls-Royce Seat Škoda-VW Smart Spyker SsangYong Toyota Volkswagen Wiesmann |
Criteria
| Inner Diameter [mm]: | 7,52 mm |
| Thickness [mm]: | 3,5 mm |
| Material: | FPM (fluoride rubber) |
| Cross-Sectional Form: | O-Ring |
Show all
Show less
Your price:
USD $0.36
(USD $0.36 without VAT 0%)
| Warehouse: | > 25 pcs |
General information
| Code: | 50014896 |
| Brand: | KOLBENSCHMIDT |
| Title: | Oil Filter |
| Car: | OPEL |
Criteria
| Filter type: | Spin-on Filter |
| Outer Diameter 1 [mm]: | 76 mm |
| Inner Diameter 1 [mm]: | 61 mm |
| Thread Size: | M 22 X 1,5 |
| Height [mm]: | 88 mm |
| Supplementary Article/Supplementary Info 2: | with one anti-return valve |
Show all
Show less
General information
| Code: | 7.07224.02.0 |
| Brand: | PIERBURG |
| Title: | Auxiliary Water Pump (cooling water circuit) |
Criteria
| Operating Mode: | Electric |
| Voltage [V]: | 12,5 V |
| Diameter 1 [mm]: | 21,8 mm |
| Supplementary Article/Supplementary Info 2: | with rubber bellow |
| Supplementary Article/Supplementary Info 2: | with fastening material |
| Water pump impeller material: | Plastic |
| Total Width [mm]: | 143 mm |
| Signal type: | PWM |
Show all
Show less
General information
| Code: | FE174534 |
| Brand: | FEBI BILSTEIN |
| Title: | Sensor, coolant temperature |
| Car: | OPEL |
Criteria
| Number of connectors: | 2 |
| Colour: | black |
| Supplementary Article/Supplementary Info 2: | with seal ring |
| General Information: | These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions. |
Show all
Show less
General information
| Code: | FE181791 |
| Brand: | FEBI BILSTEIN |
| Title: | Mass Air Flow Sensor |
| Car: | OPEL |
Criteria
| Resistor Type: | Hot-film Sensor |
| Number of connectors: | 8 |
| General Information: | These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions. |
Show all
Show less
General information
| Code: | FE181970 |
| Brand: | FEBI BILSTEIN |
| Title: | Mass Air Flow Sensor |
| Car: | OPEL |
Criteria
| Resistor Type: | Hot-film Sensor |
| Number of connectors: | 8 |
| Housing Type: | without housing |
| General Information: | These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions. |
Show all
Show less
General information
| Code: | FE44442 |
| Brand: | FEBI BILSTEIN |
| Title: | Screw Plug, oil sump |
| Car: | OPEL |
Criteria
| Length [mm]: | 37 mm |
| Outer Diameter [mm]: | 27 mm |
| External Thread Size: | M12 x 1,75 |
| Thread Length [mm]: | 17 mm |
| Quality/ Grade: | 5.8 |
| Spanner Size: | 15 |
| Bolt Head-/Nut Design: | External Hexagon |
| Material: | Steel |
| Surface: | Zinc-coated |
| Screw length below head [mm]: | 25 mm |
| Supplementary Article/Supplementary Info 2: | with seal ring |
| General Information: | These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions. |
Show all
Show less
General information
| Code: | FE48881 |
| Brand: | FEBI BILSTEIN |
| Title: | Screw Plug, oil sump |
| Car: | OPEL |
Criteria
| Length [mm]: | 37 mm |
| Outer Diameter [mm]: | 27 mm |
| External Thread Size: | M12 x 1,75 |
| Thread Length [mm]: | 17 mm |
| Quality/ Grade: | 5.8 |
| Spanner Size: | 15 |
| Bolt Head-/Nut Design: | External Hexagon |
| Material: | Steel |
| Surface: | Zinc-coated |
| Screw length below head [mm]: | 25 mm |
| Supplementary Article/Supplementary Info 2: | with seal ring |
| General Information: | These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions. |
Show all
Show less
General information
| Code: | 7.11225.30.0 |
| Brand: | PIERBURG |
| Title: | Sensor, fuel pressure |
| Car: | OPEL |
Criteria
| External Thread [mm]: | M10 X 1 MM mm |
| Spanner Size: | 16 |
| Tightening Torque [Nm]: | 15 Nm |
| Connector Shape: | oval |
| Socket colour: | black |
| Mounting Type: | Bolted |
| Number of pins: | 3 -pin connector |
| Fitting Position: | Fuel Line |
Show all
Show less
General information
| Code: | 7.18222.29.0 |
| Brand: | PIERBURG |
| Title: | Sensor, intake manifold pressure |
Criteria
| Operating Mode: | Electric-pneumatic |
| Voltage [V]: | 12 V |
| For OE number: | 55573248 |
Show all
Show less