Search by vehicle
Search by KBA
Search by engine
FORD XTJA
Choose your car manufacturer, model and engine type. This will allow our system to find parts for your vehicle.
FORD XTJA
Choose a car by KBA.
FORD XTJA
Choose an engine.
View search
Hide search
Spare parts FORD XTJA
General information
| Code: | 50014270 |
| Brand: | KOLBENSCHMIDT |
| Title: | Air Filter |
| Car: | FORD |
Criteria
| Length [mm]: | 196 mm |
| Width [mm]: | 161 mm |
| Height [mm]: | 69 mm |
| Filter type: | Filter Insert |
Show all
Show less
General information
| Code: | 50014566 |
| Brand: | KOLBENSCHMIDT |
| Title: | Oil Filter |
| Car: | FORD |
Criteria
| Filter type: | Spin-on Filter |
| Outer Diameter 1 [mm]: | 78 mm |
| Inner Diameter 1 [mm]: | 72 mm |
| Thread Size: | 3/4 - 16 UNF |
| Height [mm]: | 75 mm |
Show all
Show less
General information
| Code: | 7.02400.05.0 |
| Brand: | PIERBURG |
| Title: | Water Pump, engine cooling |
| Car: | FORD |
Criteria
| Operating Mode: | mechanical |
| Water pump impeller material: | Plastic |
| Supplementary Article/Supplementary Info: | with gasket/seal |
Show all
Show less
General information
| Code: | 7.04274.02.0 |
| Brand: | PIERBURG |
| Title: | Oil Pump |
| Car: | FORD |
Criteria
| Supplementary Article/Supplementary Info: | with gasket/seal |
| Supplementary Article/Supplementary Info 2: | with shaft seal |
General information
| Code: | FE101481 |
| Brand: | FEBI BILSTEIN |
| Title: | Injector |
| Car: | FORD |
Criteria
| Number of connectors: | 2 |
| Supplementary Article/Supplementary Info: | with gaskets/seals |
| Guarantee: | 3 years guarantee |
| General Information: | These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions. |
Show all
Show less
General information
| Code: | FE103577 |
| Brand: | FEBI BILSTEIN |
| Title: | Sensor, crankshaft pulse |
| Car: | FORD |
Criteria
| Number of connectors: | 2 |
| For OE number: | 1 110 834 |
| Guarantee: | 3 years guarantee |
| General Information: | These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions. |
Show all
Show less
General information
| Code: | FE103578 |
| Brand: | FEBI BILSTEIN |
| Title: | Sensor, camshaft position |
| Car: | FORD |
Criteria
| Length [mm]: | 52,5 mm |
| Outer Diameter [mm]: | 18 mm |
| Number of connectors: | 2 |
| Supplementary Article/Supplementary Info 2: | with seal ring |
| Guarantee: | 3 years guarantee |
| General Information: | These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions. |
Show all
Show less
General information
| Code: | FE105910 |
| Brand: | FEBI BILSTEIN |
| Title: | Mass Air Flow Sensor |
| Car: | FORD |
Criteria
| Resistor Type: | Hot-film Sensor |
| Number of connectors: | 6 |
| Housing Type: | without housing |
| For OE number: | 4 515 688 |
| Guarantee: | 3 years guarantee |
| General Information: | These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions. |
Show all
Show less
General information
| Code: | FE105933 |
| Brand: | FEBI BILSTEIN |
| Title: | Cap, coolant tank |
| Car: | FORD |
Criteria
| Material: | Plastic |
| Opening Pressure [bar]: | 1,45 bar |
| For OE number: | 1 301 104 |
| Guarantee: | 3 years guarantee |
| General Information: | These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions. |
Show all
Show less
General information
| Code: | FE106210 |
| Brand: | FEBI BILSTEIN |
| Title: | Radiator Hose |
| Car: | FORD |
Criteria
| Cooling Hose: | from thermostat to radiator |
| Material: | EPDM (ethylene propylene diene Monomer (M-class) rubber) |
| Fitting Position: | Lower Right |
| Supplementary Article/Supplementary Info 2: | with clamps |
| Observe service information: | yes |
| Guarantee: | 3 years guarantee |
| General Information: | These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions. |
Show all
Show less