Search by vehicle
Search by KBA
Search by engine
HONDA L15BY
Choose your car manufacturer, model and engine type. This will allow our system to find parts for your vehicle.
HONDA L15BY
Choose a car by KBA.
HONDA L15BY
Choose an engine.
View search
Hide search
Spare parts HONDA L15BY
General information
| Code: | 50013109 |
| Brand: | KOLBENSCHMIDT |
| Title: | Oil Filter |
| Car: | OPEL |
Criteria
| Filter type: | Spin-on Filter |
| Outer Diameter 1 [mm]: | 66 mm |
| Inner Diameter 1 [mm]: | 55 mm |
| Outer Diameter 2 [mm]: | 63 mm |
| Thread Size: | M20 x 1,5 |
| Height [mm]: | 86 mm |
| Bypass Valve Opening Pressure [bar]: | 1,2 bar |
| Supplementary Article/Supplementary Info 2: | with one anti-return valve |
Show all
Show less
General information
| Code: | 50013109/3 |
| Brand: | KOLBENSCHMIDT |
| Title: | Oil Filter |
| Car: | OPEL |
Criteria
| Filter type: | Spin-on Filter |
| Outer Diameter 1 [mm]: | 66 mm |
| Inner Diameter 1 [mm]: | 55 mm |
| Outer Diameter 2 [mm]: | 63 mm |
| Thread Size: | M20 x 1,5 |
| Height [mm]: | 83 mm |
| Bypass Valve Opening Pressure [bar]: | 1,2 bar |
| Supplementary Article/Supplementary Info 2: | with one anti-return valve |
Show all
Show less
General information
| Code: | FE107623 |
| Brand: | FEBI BILSTEIN |
| Title: | Sensor, coolant temperature |
| Car: | HONDA |
Criteria
| Number of connectors: | 2 |
| Colour: | black |
| Guarantee: | 3 years guarantee |
| General Information: | These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions. |
Show all
Show less
General information
| Code: | FE175105 |
| Brand: | FEBI BILSTEIN |
| Title: | Water Pump, engine cooling |
| Car: | HONDA |
Criteria
| Housing material: | Metal |
| Water pump impeller material: | Metal |
| Seal Material: | Rubber |
| Number of blades/vanes: | 7 |
| Supplementary Article/Supplementary Info: | with gasket/seal |
| Observe service information: | yes |
| Guarantee: | 3 years guarantee |
| General Information: | These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions. |
Show all
Show less
General information
| Code: | FE177917 |
| Brand: | FEBI BILSTEIN |
| Title: | Mass Air Flow Sensor |
| Car: | HONDA |
Criteria
| Resistor Type: | Hot-wire Sensor |
| Number of connectors: | 5 |
| Supplementary Article/Supplementary Info: | with gasket/seal |
| Housing Type: | without housing |
| Guarantee: | 3 years guarantee |
| General Information: | These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions. |
Show all
Show less
General information
| Code: | FE181283 |
| Brand: | FEBI BILSTEIN |
| Title: | V-ribbed Belt |
Criteria
| Length [mm]: | 1098 mm |
| Material: | EPDM (ethylene propylene diene Monomer (M-class) rubber) |
| Number of ribs: | 6 |
| Tensile Cord Material: | Aramid |
| Alternator Type: | for starter generator |
| Guarantee: | 3 years guarantee |
| General Information: | These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions. |
Show all
Show less
General information
| Code: | FE184271 |
| Brand: | FEBI BILSTEIN |
| Title: | Oil Filter |
| Car: | HONDA |
Criteria
| Filter type: | Spin-on Filter |
| Height [mm]: | 87 mm |
| Outer Diameter [mm]: | 69 mm |
| Internal Thread Size: | M20 x 1,5 |
| Seal Ring Diameter [mm]: | 62,5 mm |
| Guarantee: | 3 years guarantee |
| General Information: | These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions. |
Show all
Show less
General information
| Code: | FE184916 |
| Brand: | FEBI BILSTEIN |
| Title: | Deflection/Guide Pulley, V-ribbed belt |
| Car: | HONDA |
Criteria
| Width of castor bearing surface [mm]: | 30 mm |
| Inner Diameter [mm]: | 10 mm |
| Outer Diameter [mm]: | 70 mm |
| Mounting points diameter [mm]: | 10 mm |
| Material: | Metal |
| Guarantee: | 3 years guarantee |
| General Information: | These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions. |
Show all
Show less
General information
| Code: | FE185380 |
| Brand: | FEBI BILSTEIN |
| Title: | EGR Valve |
| Car: | HONDA |
Criteria
| Number of connectors: | 5 |
| Supplementary Article/Supplementary Info: | with gasket/seal |
| Guarantee: | 3 years guarantee |
| General Information: | These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions. |
Show all
Show less
General information
| Code: | FE186029 |
| Brand: | FEBI BILSTEIN |
| Title: | Belt Tensioner, V-ribbed belt |
| Car: | HONDA |
Criteria
| Width of castor bearing surface [mm]: | 30 mm |
| Outer Diameter [mm]: | 70 mm |
| Material: | Metal |
| Operating Mode: | Automatic |
| Guarantee: | 3 years guarantee |
| General Information: | These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions. |
Show all
Show less