Search by vehicle
Search by KBA
Search by engine
MAZDA S8Y1
Choose your car manufacturer, model and engine type. This will allow our system to find parts for your vehicle.
MAZDA S8Y1
Choose a car by KBA.
MAZDA S8Y1
Choose an engine.
View search
Hide search
Spare parts MAZDA S8Y1
General information
| Code: | 7.05314.02.0 |
| Brand: | PIERBURG |
| Title: | Pressure converter, turbocharger |
| Car: | MAZDA |
Criteria
| Valve Type: | Solenoid Valve |
| Operating Mode: | Electric-pneumatic |
| Voltage [V]: | 12 V |
Show all
Show less
General information
| Code: | FE101927 |
| Brand: | FEBI BILSTEIN |
| Title: | Alternator Freewheel Clutch |
| Car: | MAZDA |
Criteria
| Width [mm]: | 39,2 mm |
| Inner Diameter [mm]: | 17 mm |
| Outer Diameter [mm]: | 50,9 mm |
| Tightening Torque [Nm]: | 85 Nm |
| Number of ribs: | 6 |
| Supplementary Article/Supplementary Info 2: | with cover |
| General Information: | These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions. |
Show all
Show less
General information
| Code: | FE14098 |
| Brand: | FEBI BILSTEIN |
| Title: | Pilot Bearing, clutch |
| Car: | ŠKODA-VW |
Criteria
| Width [mm]: | 15 mm |
| Inner Diameter [mm]: | 15,4 mm |
| Outer Diameter [mm]: | 21 mm |
| Bearing Type: | Needle Bearing |
| General Information: | These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions. |
Show all
Show less
General information
| Code: | FE177117 |
| Brand: | FEBI BILSTEIN |
| Title: | Sensor, crankshaft pulse |
| Car: | MAZDA |
Criteria
| Number of connectors: | 3 |
| General Information: | These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions. |
General information
| Code: | FE180282 |
| Brand: | FEBI BILSTEIN |
| Title: | Screw Plug, oil sump |
| Car: | MAZDA |
Criteria
| Length [mm]: | 18 mm |
| External Thread Size: | M14 x 1,5 |
| Thread Length [mm]: | 10 mm |
| Spanner Size: | 19 |
| Bolt Head-/Nut Design: | External Hexagon |
| Material: | Steel |
| Surface: | Zinc-coated |
| Screw length below head [mm]: | 10 mm |
| Supplementary Article/Supplementary Info 2: | without seal ring |
| General Information: | These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions. |
Show all
Show less
General information
| Code: | FE184131 |
| Brand: | FEBI BILSTEIN |
| Title: | Oil Filter |
| Car: | MAZDA |
Criteria
| Filter type: | Spin-on Filter |
| Height [mm]: | 95 mm |
| Outer Diameter [mm]: | 78 mm |
| Internal Thread Size: | 3/4" - 16 UNF |
| General Information: | These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions. |
Show all
Show less
General information
| Code: | FE184943 |
| Brand: | FEBI BILSTEIN |
| Title: | V-ribbed Belt |
Criteria
| Length [mm]: | 1199 mm |
| Material: | EPDM (ethylene propylene diene Monomer (M-class) rubber) |
| Number of ribs: | 6 |
| Tensile Cord Material: | Aramid |
| Alternator Type: | for starter generator |
| General Information: | These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions. |
Show all
Show less
General information
| Code: | FE194288 |
| Brand: | FEBI BILSTEIN |
| Title: | Seal Ring, oil drain plug |
| Car: | HYUNDAI |
Criteria
| Inner Diameter [mm]: | 14,4 mm |
| Height [mm]: | 2 mm |
| Outer Diameter [mm]: | 22 mm |
| Material: | Aluminium |
| General Information: | These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions. |
Show all
Show less
General information
| Code: | FE197893 |
| Brand: | FEBI BILSTEIN |
| Title: | Screw Plug, oil sump |
| Car: | FORD |
Criteria
| Length [mm]: | 18 mm |
| External Thread Size: | M14 x 1,5 |
| Thread Length [mm]: | 10 mm |
| Quality/ Grade: | 6.8 |
| Spanner Size: | 19 |
| Bolt Head-/Nut Design: | External Hexagon |
| Material: | Steel |
| Surface: | Zinc-coated |
| Screw length below head [mm]: | 10 mm |
| Supplementary Article/Supplementary Info 2: | with seal ring |
| General Information: | These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions. |
Show all
Show less
General information
| Code: | FE198093 |
| Brand: | FEBI BILSTEIN |
| Title: | Seal Ring, oil drain plug |
| Car: | MAZDA |
Criteria
| Inner Diameter [mm]: | 12,4 mm |
| Outer Diameter [mm]: | 17,8 mm |
| Material: | Copper |
| General Information: | These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions. |
Show all
Show less