Search by vehicle
Search by KBA
Search by engine
JEEP EBF
Choose your car manufacturer, model and engine type. This will allow our system to find parts for your vehicle.
JEEP EBF
Choose a car by KBA.
JEEP EBF
Choose an engine.
View search
Hide search
Spare parts JEEP EBF
Netto price:
USD $7.05
(USD $7.05 without VAT 0%)
Your price:
-40%
USD $4.23
(USD $4.23 without VAT 0%)
| Warehouse: | 2 pcs | |
| Supplier: | > 25 pcs |
General information
| Code: | 176.090 |
| Brand: | ELRING |
| Title: | Seal Ring, oil drain plug |
| Car: | FORD |
Criteria
| Inner Diameter [mm]: | 13 mm |
| Outer Diameter [mm]: | 22,4 mm |
| Thickness [mm]: | 3 mm |
| Material: | ACM (Polyacrylate) |
| Alternative Repair Kit: | 505.550 |
| Alternative Repair Kit: | 505.540 |
| Goods tariff number: | 3926904590 |
Show all
Show less
Your price:
USD $0.32
(USD $0.32 without VAT 0%)
| Warehouse: | > 25 pcs |
General information
| Code: | 893.889 |
| Brand: | ELRING |
| Title: | Seal Ring, injector |
| Car: | Alpina Audi BMW Chevrolet Chrysler Citroën Cupra Daewoo DS Fiat Ford Jeep Land Rover Lotus Mazda Mercedes-Benz Mini Mitsubishi Nissan Opel Peugeot Porsche Puch Renault Rolls-Royce Seat Škoda-VW Smart Spyker SsangYong Toyota Volkswagen Wiesmann |
Criteria
| Inner Diameter [mm]: | 7,52 mm |
| Thickness [mm]: | 3,5 mm |
| Material: | FPM (fluoride rubber) |
| Cross-Sectional Form: | O-Ring |
Show all
Show less
Your price:
USD $0.36
(USD $0.36 without VAT 0%)
| Warehouse: | > 25 pcs |
General information
| Code: | FE106369 |
| Brand: | FEBI BILSTEIN |
| Title: | Fuel Filter |
| Car: | JEEP |
Criteria
| Filter type: | In-Line Filter |
| Length [mm]: | 152 mm |
| Outer Diameter [mm]: | 50 mm |
| Guarantee: | 3 years guarantee |
| General Information: | These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions. |
Show all
Show less
General information
| Code: | FE177514 |
| Brand: | FEBI BILSTEIN |
| Title: | Oxygen Sensor |
| Car: | MERCEDES |
Criteria
| Oxygen Sensor: | Heated |
| External Thread Size: | M18 x 1,5 |
| Spanner Size: | 22 |
| Number of connectors: | 4 |
| Cable Length [mm]: | 321 mm |
| Guarantee: | 3 years guarantee |
| General Information: | These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions. |
Show all
Show less
General information
| Code: | FE193086 |
| Brand: | FEBI BILSTEIN |
| Title: | Thermostat, coolant |
| Car: | FIAT |
Criteria
| Opening Temperature [°C]: | 90 °C |
| Supplementary Article/Supplementary Info: | with temperature sensor |
| Supplementary Article/Supplementary Info: | with gasket/seal |
| Housing Type: | with housing |
| Observe service information: | yes |
| Guarantee: | 3 years guarantee |
| General Information: | These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions. |
Show all
Show less
General information
| Code: | FE31117 |
| Brand: | FEBI BILSTEIN |
| Title: | Screw Plug, oil sump |
| Car: | OPEL |
Criteria
| Length [mm]: | 31 mm |
| External Thread Size: | M18 x 1,5 |
| Thread Length [mm]: | 14,5 mm |
| Spanner Size: | 13 |
| Bolt Head-/Nut Design: | External Hexagon |
| Material: | Steel |
| Surface: | Zinc-coated |
| Screw length below head [mm]: | 21 mm |
| Supplementary Article/Supplementary Info 2: | without seal ring |
| Guarantee: | 3 years guarantee |
| General Information: | These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions. |
Show all
Show less
General information
| Code: | FE48883 |
| Brand: | FEBI BILSTEIN |
| Title: | Screw Plug, oil sump |
| Car: | OPEL |
Criteria
| Length [mm]: | 31 mm |
| External Thread Size: | M18 x 1,5 |
| Thread Length [mm]: | 14,5 mm |
| Spanner Size: | 13 |
| Bolt Head-/Nut Design: | External Hexagon |
| Material: | Steel |
| Surface: | Zinc-coated |
| Screw length below head [mm]: | 21 mm |
| Supplementary Article/Supplementary Info 2: | without seal ring |
| Guarantee: | 3 years guarantee |
| General Information: | These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions. |
Show all
Show less
Netto price:
USD $4.14
(USD $4.14 without VAT 0%)
Your price:
-25%
USD $3.10
(USD $3.10 without VAT 0%)
| Warehouse: | 0 pcs | |
|
|
Supplier: | Check |

