Search by vehicle
Search by KBA
Search by engine
MITSUBISHI 4J10
Choose your car manufacturer, model and engine type. This will allow our system to find parts for your vehicle.
MITSUBISHI 4J10
Choose a car by KBA.
MITSUBISHI 4J10
Choose an engine.
View search
Hide search
Spare parts MITSUBISHI 4J10
General information
| Code: | 036.164 |
| Brand: | ELRING |
| Title: | Sealing compound - Dirko - Grey, 70ml |
| Tag: | Dirko HT |
| Car: | ŠKODA-VW |
Criteria
| Chemical Properties: | Permanently elastic |
| Chemical Properties: | not solvent-bearing |
| Chemical Properties: | UV resistant |
| Container Type: | Tube |
| Capacity [ml]: | 70 ml |
| Material: | Silicone |
| Temperature range from [°C]: | -60 °C |
| Temperature range to [°C]: | 315 °C |
Show all
Show less
Netto price:
USD $6.00
(USD $6.00 without VAT 0%)
Your price:
-25%
USD $4.50
(USD $4.50 without VAT 0%)
| Warehouse: | > 25 pcs |
General information
| Code: | B23.410 |
| Brand: | ELRING |
| Title: | Seal Set, valve stem |
| Car: | Chrysler Citroën Dodge Fiat Hyundai Jeep Kia Lancia Mitsubishi Peugeot 4B10/4B11/4B12/4J10/4J11/4J12/EDG/SFZ 2007+ |
Criteria
| Material: | FPM (fluoride rubber) |
Netto price:
USD $29.14
(USD $29.14 without VAT 0%)
Your price:
-25%
USD $21.85
(USD $21.85 without VAT 0%)
| Warehouse: | > 25 pcs |
General information
| Code: | 50013109 |
| Brand: | KOLBENSCHMIDT |
| Title: | Oil Filter |
| Car: | OPEL |
Criteria
| Filter type: | Spin-on Filter |
| Outer Diameter 1 [mm]: | 66 mm |
| Inner Diameter 1 [mm]: | 55 mm |
| Outer Diameter 2 [mm]: | 63 mm |
| Thread Size: | M20 x 1,5 |
| Height [mm]: | 86 mm |
| Bypass Valve Opening Pressure [bar]: | 1,2 bar |
| Supplementary Article/Supplementary Info 2: | with one anti-return valve |
Show all
Show less
General information
| Code: | FE100328 |
| Brand: | FEBI BILSTEIN |
| Title: | Deflection/Guide Pulley, V-ribbed belt |
| Car: | MITSUBISHI |
Criteria
| Width of castor bearing surface [mm]: | 24 mm |
| Inner Diameter [mm]: | 10 mm |
| Outer Diameter [mm]: | 70 mm |
| Mounting points diameter [mm]: | 10 mm |
| Material: | Plastic |
| Supplementary Article/Supplementary Info 2: | with screw |
| Guarantee: | 3 years guarantee |
| General Information: | These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions. |
Show all
Show less
General information
| Code: | FE102328 |
| Brand: | FEBI BILSTEIN |
| Title: | Alternator Freewheel Clutch |
| Car: | PEUGEOT |
Criteria
| Width [mm]: | 37,6 mm |
| Inner Diameter [mm]: | 17 mm |
| Outer Diameter [mm]: | 55 mm |
| Number of ribs: | 6 |
| Supplementary Article/Supplementary Info 2: | with cover |
| Guarantee: | 3 years guarantee |
| General Information: | These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions. |
Show all
Show less
General information
| Code: | FE103321 |
| Brand: | FEBI BILSTEIN |
| Title: | Mounting, engine |
| Car: | MITSUBISHI |
Criteria
| Fitting Position: | Rear |
| Fitting Position: | both sides |
| Mounting Type: | Rubber-Metal Mount |
| Observe service information: | yes |
| Guarantee: | 3 years guarantee |
| General Information: | These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions. |
Show all
Show less
General information
| Code: | FE104183 |
| Brand: | FEBI BILSTEIN |
| Title: | Mounting, engine |
| Car: | MITSUBISHI |
Criteria
| Fitting Position: | Rear |
| Fitting Position: | Centre |
| Mounting Type: | Rubber-Metal Mount |
| Observe service information: | yes |
| Guarantee: | 3 years guarantee |
| General Information: | These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions. |
Show all
Show less
General information
| Code: | FE106790 |
| Brand: | FEBI BILSTEIN |
| Title: | Sensor, crankshaft pulse |
| Car: | MITSUBISHI |
Criteria
| Number of connectors: | 3 |
| Connector Shape: | oval |
| Guarantee: | 3 years guarantee |
| General Information: | These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions. |
Show all
Show less
General information
| Code: | FE106814 |
| Brand: | FEBI BILSTEIN |
| Title: | Ignition Coil |
| Car: | MITSUBISHI |
Criteria
| Number of connectors: | 3 |
| Guarantee: | 3 years guarantee |
| General Information: | These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions. |
Show all
Show less
General information
| Code: | FE107416 |
| Brand: | FEBI BILSTEIN |
| Title: | Control Valve, camshaft adjustment |
| Tag: | febi Plus |
| Car: | MITSUBISHI |
Criteria
| Number of connectors: | 2 |
| For OE number: | 1028A109 |
| Guarantee: | 3 years guarantee |
| General Information: | These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions. |
Show all
Show less