Search by vehicle
Search by KBA
Search by engine
FIAT 4D56
Choose your car manufacturer, model and engine type. This will allow our system to find parts for your vehicle.
FIAT 4D56
Choose a car by KBA.
FIAT 4D56
Choose an engine.
View search
Hide search
Spare parts FIAT 4D56
General information
| Code: | HK0096 |
| Brand: | ET ENGINETEAM |
| Title: | Crankshaft |
| Car: | HYUNDAI |
General information
| Code: | 180088001215 |
| Brand: | NE |
| Title: | Crankshaft Bearing Shell Set |
| Car: | MITSUBISHI |
Criteria
| Oversize [mm]: | 0,25 mm |
General information
| Code: | 180088001221 |
| Brand: | NE |
| Title: | Crankshaft Bearing Shell Set |
| Car: | MITSUBISHI |
Criteria
| Oversize [mm]: | 0,5 mm |
General information
| Code: | 180088001226 |
| Brand: | NE |
| Title: | Crankshaft Bearing Shell Set |
| Car: | MITSUBISHI |
Criteria
| Oversize [mm]: | 0,75 mm |
General information
| Code: | FE10620 |
| Brand: | FEBI BILSTEIN |
| Title: | Tensioner Pulley, timing belt |
| Car: | MITSUBISHI |
Criteria
| Width of castor bearing surface [mm]: | 20 mm |
| Width [mm]: | 29 mm |
| Outer Diameter [mm]: | 58 mm |
| Observe service information: | yes |
| General Information: | These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions. |
Show all
Show less
General information
| Code: | FE182314 |
| Brand: | FEBI BILSTEIN |
| Title: | Deflection/Guide Pulley, V-ribbed belt |
| Car: | MITSUBISHI |
Criteria
| Width of castor bearing surface [mm]: | 30 mm |
| Inner Diameter [mm]: | 10 mm |
| Outer Diameter [mm]: | 70 mm |
| Mounting points diameter [mm]: | 10 mm |
| Material: | Metal |
| General Information: | These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions. |
Show all
Show less
General information
| Code: | FE184075 |
| Brand: | FEBI BILSTEIN |
| Title: | Fuel Filter |
| Car: | MITSUBISHI |
Criteria
| Filter type: | Filter Insert |
| Inner Diameter [mm]: | 9 mm |
| Height [mm]: | 86 mm |
| Outer Diameter [mm]: | 84 mm |
| Seal Ring Diameter [mm]: | 77,5 mm |
| Supplementary Article/Supplementary Info 2: | with seal ring |
| General Information: | These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions. |
Show all
Show less
General information
| Code: | FE184132 |
| Brand: | FEBI BILSTEIN |
| Title: | Fuel Filter |
| Car: | TOYOTA |
Criteria
| Filter type: | Filter Insert |
| Height [mm]: | 77 mm |
| Outer Diameter [mm]: | 83 mm |
| Supplementary Article/Supplementary Info 2: | with seal ring |
| General Information: | These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions. |
Show all
Show less
General information
| Code: | FE186018 |
| Brand: | FEBI BILSTEIN |
| Title: | Water Pump, engine cooling |
| Car: | MITSUBISHI |
Criteria
| Housing material: | Cast Aluminium |
| Water pump impeller material: | Metal |
| Seal Material: | Paper |
| Number of blades/vanes: | 8 |
| Supplementary Article/Supplementary Info: | with gaskets/seals |
| Observe service information: | yes |
| General Information: | These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions. |
Show all
Show less
General information
| Code: | FE26113 |
| Brand: | FEBI BILSTEIN |
| Title: | Timing Belt |
| Car: | HYUNDAI |
Criteria
| Width [mm]: | 19 mm |
| Material: | HNBR (hydrogenated nitrile butadiene rubber) |
| Number of Teeth: | 99 |
| Belts: | with rounded tooth profile |
| Observe service information: | yes |
| General Information: | These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions. |
Show all
Show less